Ajax Socket Plus (Type G) Smart Plug with Energy Monitor
- Control Devices Remotely
- Reduces carbon footprint
- Arc Fault Protection
The Ajax Socket Plus is a smart plug that can be used alongside your Ajax alarm system to control lights and devices remotely when used with the app (Read more)
The Ajax Socket Plus is a smart plug that can be used alongside your Ajax alarm system to control lights and devices remotely when used with the Ajax app. The plug can be pre-programmed to turn on and off at specific times of the day, which can be used a security measure or to greet the user when they return home from work.
When you leave your house, close the door and arm the system. All top energy consuming and dangerous appliances will be automatically switched off. Iron, heater, and toaster will no longer create a risk of fire. In addition, Socket informs you about the most power consuming devices. As soon as an appliance starts consuming electricity, Socket's LED changes colour in real time, eventually turning purple to highlight high power consumption appliances.
The Socket Plus also features arc fault protection. An electric arc is a prolonged electric discharge between two conductors with high current density and low voltage. It occurs when conductor insulation is damaged. For example, in an extension cord with a broken cable. The arc can instantly damage the connected device or the plug itself and cause a fire. Protection is activated immediately if an arc or spark occurs in the device connected to the plug
- Instant control via Ajax app
- Grade II
- Arc fault protection
- Activate devices in your home
- Create scenes which activate at the touch of a button
- Toggle your devices on and off
- Connects to Wi-Fi network
- Reduce your carbon footprint
- Identifies 'power vampires'
- Internal shutters to prevent object insertion
- Operates in bistable or pulse modes
- Protects devices against overcurrent and voltage surges
- Two-way communication at a distance of 1100 meters
- Command delivery in 0.15 sec
|Compatible hub models
Hub 2 (2G)
Hub 2 (4G)
Hub 2 Plus
Hub Hybrid (2G)
Hub Hybrid (4G)
|Compatible range extenders
|Jeweller communication technology
||Proprietary wireless technology for
transmission of events.
||866.0 - 866.5 MHz
868.0 - 868.6 MHz
868.7 - 869.2 MHz
905.0 - 926.5 MHz
915.85 - 926.5 MHz
921.0 - 922.0 MHz
|Maximum effective radiated power
||up to 20 mW
Automatic power control to reduce power consumption and radio interference.
|Radio signal modulation
|Radio communication range
||up to 1100 m
Between plug and hub or range extender in an open space.
|Radio signal encryption
||All the data stored and transmitted are
protected by block encryption with a dynamic key.
|Radio frequency hopping
||Radio communication uses frequency hopping to prevent
interception and jamming.
||Closes and opens the electric circuit. Designed for more than
|Energy consumption monitoring
|Maximum current protection
The value is set in the device Settings in Ajax apps.
||up to 16 A (up to 5 seconds)
|Current protection (constant load)
||3 A - fluorescent lamps
8 A - incandescent lamps
13 A - general inductive loads
|Spark and arc protection
||triggers if an arc occurs in a device or conductor connected to
If arc protection is activated, power is not restored automatically. Power supply can be restored with a command in the Ajax app or by pressing the function button.
|Adjustable pulse duration
||1 to 255 s
Set up in Ajax apps. The setting is available when the socket operates in pulse mode.
||Informs about the state of the socket, as well as the level of
power consumed by the connected devices. The exact power
consumption value is available in the socket States in Ajax
The socket turns off automatically if the temperature is exceeded.
||normally open (NO)
normally closed (NC)
Set up in the socket settings. Can be set for both pulse and bistable operation modes.
||The device is designed only for indoor installation. Has a
British standard (type G) socket and plug.
|Protection against forgery
|Communication loss detection
||from 36 s
Detection time depends on the Jeweller (or Jeweller/Fibra) settings.
|Power supply voltage
||230 V~ ± 10%
||up to 3 kW
If protection is installed for a current of 13 A at a 230 V~ resistive load. For 380 V~ inductive or capacitive load, the maximum value of the switched current goes down to 8 A.
|Average power consumption of the device
||≤ 1.5 W
||minimum - 184 V~
maximum - 253 V~
This protects connected appliances from voltage surges. Hub administrator or PRO with system configuration rights can disable this protection.
|Electric shock protection class
With grounding terminal.
|-- No videos available --|
|Socket Plus Datasheet|
|Socket Plus User Manual|
|Ajax support site|
Be the first to ask a question and help others interested in this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
Our technical support team are experienced installation engineers with years of field experience.
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
* Qualifying products only, subject to terms. For more information view our delivery information.