GJD D-TECT X MKIII 30-50M Wireless PIR Motion Detectors
- Wire free detector
- 500m range
- IP65 Weatherproof
GJD D-TECT X MkIII Long Range Outdoor PIR Sensors
The D-TECT X range of long range outdoor PIR detectors from GJD provide a reliable way to install a network of motion detectors without the hassle of installing alarm and power cables to each location. Up to 16 battery powered D-TECT X detectors can be linked to a receiver up to 500m away which has a physical output for each channel that can be used to trigger lighting, an alarm, a CCTV camera or any other system with inputs.
By using unique channels multiple receivers can be used on a single site to provide comprehensive perimeter protection.
The D-TECT X range of detectors is fully BS8418 compliant and is IP65 rated for continuous outdoor use in all weathers.
There are 3 versions of the D-TECT X MkIII detectors available which offer different detection areas
- GJD430 D-TECT X MKIII 30m x 30m
- GJD440 D-TECT X MKIII 40m x 4m & 40m x 8m (supplied with 2 lenses)
- GJD450 D-TECT X MKIII 50m x 10m
The image below illustrates some examples of how a D-TECT X detection system can be used to trigger multiple devices. PIR 1 is used to turn a PTZ to a preset viewpoint, PIR 2 is used to switch on LED floodlighting and PIR 3 is used to trigger an alarm system. All 3 PIR's in the example are connected to a single wireless receiver that is hard wired to the separate control points for the CCTV, lighting and alarm systems.
On a larger scale the D-TECT X wireless PIR detection system can be used for comprehensive perimeter protection or on a large site where multiple buildings are located.
- Long range 500m line of sight
- Long battery life 1-2 years
- IP65 rated for all weather use
- Choice of 3 detection zones
- up to 50m detection range
- Can be combined to form large system
||500 Metres with line of sight|
30m x 30m
40m x 4m or 40m x 8m
50m x 10m
||180º pan & 90º tilt|
Up to 6m - Optimum 3m
Up to 4m - Optimum 3m
Up to 4m - Optimum 3m
||Front & rear tamper switches, case open and removal from wall|
Outputs from GJD392 D-TECT X Receiver - Per Detector
||1 Open Relay: 1 Closed Relay: Tamper; RF Loss; Low Battery, GJD Lighting System|
2 x CR123, 3 volt batteries (Not included)
Dusk (2 Lux) to 24 hour
||High impact ABS|
IP65 Ingress protection
Product variants available
|14148||GJD430 30m x 30m||Ordered on Request|
|14149||GJD 440 40m x 4m / 8m||Ordered on Request|
|14150||GJD450 50m x 10m||Ordered on Request|
|GJD D-TECT X MKIII datasheet|
|GJD support site|
There are no reviews for this product. Please leave your review below.
Thanks for taking the time to review this product.
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Ask your question here.
Why buy the GJD D-TECT X MKIII 30-50M Wireless PIR Motion Detectors from Connectec?
Our technical support team are experienced installation engineers with years of field experience.
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
We are approved GJD resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.