Tenda AP4 300Mbps Wi-Fi Access Point
- Proprietary POE Powered
- Multiple Operating Modes
- One Button Extend Mode
The Tenda AP4 offers a simple solution to extending your WIFI or can be configured as an access point and benefits from a proprietary POE power supply (Read more)
PRODUCT DETAILS
The AP4 by Tenda is designed to boost the range of your existing Wi-Fi and creates stronger signals in hard-to-reach areas for game consoles, printers, mobile devices etc. With its Power over Ethernet support and wall-mount slim design, the AP4 is flexible and simple to deploy in most locations. The AP4 features multi operation modes including Universal Repeater, Client (Station) and WISP allowing use in a wide array of applications including large properties, guest houses and hotels, restaurants and large stores etc.
One Button to boost
The AP4 features a Range Extender Button that allows users to boost
existing Wi-Fi Range by simply pressing the "Range Extender"
button.
Flexible deployment
Wall-Mount design and Power over Ethernet support make it flexible
to deploy in locations without power outlets and mains supply such
as a garage or warehouse etc.
Multi Operating Modes for Various
Scenarios
Various operating modes including AP, Universal Repeater, WISP
(Client Router) and Station(client) help you to boost Wi-Fi range
in various scenarios such as large houses, restaurants, stores
etc
- Universal Repeater mode - Extend your existing wireless coverage by relaying the wireless signal.
- WISP (Client Router) mode - Wireless connection to ISP hotspot to share Internet for local wireless and wired devices.
- Station (client) mode - Working as a wireless adaptor to connect to your wired devices.
Easy to Manage with AP Controller
The AP4 can be managed by the AC500 AP controller from Tenda. When
multiple APs are installed, you can configure SSID (Wireless
network name), Channel, Security Key, Output power etc settings
centrally through the AC500 saving time on commissioning.
Key Features
- POE Powered with proprietary injector supplied
- Up to 50m range on POE
- 300Mbps Transmission speeds
- Compact attractive design
- Simple single button repeater mode
Specifications | |
Power Method: | DC 9V=0.6A Passive PoE |
Passive PoE power supply |
Up to 40 meters Passive PoE is supported (cat5e or
up) |
Hardware Deployment |
Desktop/Wall Mount |
Video user capacity |
5 |
Wi-Fi user capacity |
20+ |
Diagnostic |
Wireless site survey, Ping, Traceroute |
Network Service |
Schedule Reboot, Http/Https |
Managed by AC |
AC500 |
Reception Sensitivity |
b mode: 1M -89dBm@8% 11M -87dBm@8% PER g mode: 54M -74dBm@8% PER n mode: 72.2M -72dBm@8% PER 150M -70dBm@8% PER |
LED |
SYS, WPS, Bridge, Wi-Fi, LAN1, LAN2 |
Frequency |
2.4GHz-2.483GHz |
LAN Settings |
Static IP, Dynamic IP |
DHCP Server |
DHCP Server, Client's list |
Wireless Rate |
11n: Up to 300Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) |
Operating Mode |
Access Point Universal Repeater Station (Client) WISP (Client+Router) Client+AP |
Wireless Function |
8 SSID Enable/Disable Wireless Radio Broadcast SSID SSID Hidden automatically when exceed client limit Client limit for SSID Transmission output power AP isolation RSSI threshold for wireless clients WMM capable APSD capable Access control-based mac address Wireless Client list VLAN for multi SSID |
Wireless Security |
64/128 WEP WPA-PSK WPA2-PSK WPA&WPA2-PSK WPA
WPA2 |
VPN Pass-through |
PPTP L2TP |
Management Tool |
Reboot Restore to factory default System Log Firmware update Time and Date Setting Backup/Restore Configuration Username Management |
Package Content |
300Mbps Wireless N Access Point AP4 1x PoE Injector 1x Quick Installation Guide 1x Ethernet cable 1x Power Adapter 2x Screws 2x Plastic Bolt |
Temperature |
Operating Temperature: -10℃~45℃ Storage Temperature: -30℃~70℃ |
Humidity |
Storage Humidity:5%~90% non-condensing Operating Humidity:10%~90% non-condensing |
Certification |
FCC/CE/Rohs/VoC |
Button |
1x Reset 1x Range Extender |
Antenna |
2x 5dBi Detachable Omni Directional (RP-SMA) |
Interface |
2 x 10/100M Ethernet Port (RJ45) |
Standard & Protocol |
IEEE 802.11n/g/b |
Dimension |
148x146.2x31.5mm |
Videos |
---|
No videos available |
Files |
---|
AP4 Datasheet |
AP4 Installation Instructions |
Links* |
---|
Tenda Support |
Tenda website |
Tenda support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
My virgin router is 50m away and my laptop is out of range, if I plug this into the end of a 50m Ethernet cable, will it project the wfi signal?
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
* Qualifying products only, subject to terms. For more information view our delivery information.