Tenda W9 Dual Band 11AC 1200Mbps In Wall Access Point

The Tendra W9 In Wall Access Point is designed to boost Wi-Fi coverage in buildings that have dense walls or large areas where Wi-Fi signal may be diminished, making it perfect for buildings such as hotels, dormitories and hospitals. It delivers an 867Mbps wireless rate at 5GHz and a 300Mbps wireless rate at 2.4GHz using the latest Wi-Fi 802.11ac technology. 

Compliant with PoE 802.3af

The port on the back panel supports Power over Ethernet (PoE) functionality, which allows both power and data to be carried over a single Ethernet cable to W9 In Wall Access Point, eliminating the need for a secondary power supply.

Advanced Wireless Security

The W9 In Wall Access Point offer advanced feature to prevent unauthorised access and data protection, including...

• 64/128bit WEP, WPA-PSK, WPA2-PSK, WPA & WPA2-PSK, WPA, WPA2
• Wireless Access Control based on the mac address of wireless adaptor
• Client Isolation and SSID isolation

VLAN Tagging for Multi SSID

The W9 can be configured to broadcast 8 SSID at 2.4GHz and 4 SSID at 5GHz. Each SSID can be tagged to a specified network VLAN to establish different internet access rights.

5GHz band steering

The 5 GHz band steering function on the W9 automatically detects clients capable of 5GHz operation and steers them to that frequency and away from the more crowded 2.4GHz frequency.

Easy to set up, Easy to manage

The W9 can be managed by AP Controller and the administrator can setup, manage and monitor all the AP's online.

Features:

• Dual band 11AC 1167Mbps
• Two 10/100Mbps LAN port
• Compliant with PoE 802.3af
• VLAN tagging for multi SSID
• Centralised management by M3