IP-COM CPE6 5GHz 2km Point to Point Outdoor Bridge CPE
IP-COM
- 5GHz 11n 300Mbps
- IP65 waterproof enclosure
- 5km Transmission distance
The IP-COM CPE6 is a wireless point to point outdoor CPE bridge that can transmit data up to 300Mbps over a range of up to 2km over a 5GHz band (Read more)
PRODUCT DETAILS
The IP-COM CPE6 is a point-to-point bridge that can transmit data wirelessly up to 2km on the 5GHz band with speeds up to 300Mbps, making it ideal for devices that are spread over a large area where cabling is not practical, such as CCTV installations. The CPE6 comes complete with a PoE (Power over Ethernet) adaptor which eliminates the need for a separate power cable, reducing cost and making installation easier.
Application
The CPE6 adopts TDMA (Time Division Multiple Access) proprietary protocol which enables wireless WISP outdoor application scenarios to be greatly improved in both performance and capacity. The 12dbi directional antenna provides a secure connection to the base station and can wirelessly transmit data over distances up to 5km.
The CPE6 is supplied with centralised management software which allows the units to be controlled and configured remotely. In addition, the Qualcomm AR9344 chipset optimises radio driven architecture to offer extended frequency support.
Auto bridge technology allows for the units to connect automatically when they face each other, which helps users get out of the congested, unlicensed 5GHz band and into clean spectrum. Signal strength can be gauged at a glance with three integrated LED lights which help find the correct position and achieve optimum performance, which speeds up installation time and creates a stronger link.
An IP65 rated casing and 6K lightening surge protection keeps the CPE12 safe from the elements and prevents expensive damage caused by electrical spikes.
Features:
- 5GHz 11n 300Mbps
- 12dbi directional antenna
- IP65 waterproof enclosure
- 6000V Lightning Protection
- AP, Station, WISP operating mode supported
- Up to 50 meters of flexible deployment with included PoE adapter
| Others | |
|---|---|
| Model | CPE6 |
| Dimensions | 193.5*80*67.5mm |
| Deployment | Pole Mount |
| Application Scenarios | WISP CPE, Data transmission and long range video surveillance |
| Hardware
Features |
|
| Frequency Range | 5GHz |
| Compliant Standards | IEEE 802.11a/n |
| Private TDMA Protocol | IMAX |
| Maximum Wireless Rate | 300Mbps |
| Interfaces | 1*10/100Mbps Ethernet Port |
| Antennas Gain | 12dbi |
| Antenna Beamwidth | Horizontal: 30° Vertical: 30° |
| Reset Button | 1 |
| DC Jack | 1 |
| Power Consumption | 6.3W |
| Waterproof Level | IP65 |
| LED indicator | PoE/LAN, Wi-Fi LED1, LED2, LED3 |
| Power Method | 12V1A Passive PoE or DC Adapter |
| Lightning Protection | 6000V |
| Passive PoE | Passive power over ethernet via PoE/LAN (+4,5pins;
-7,8pins) Voltage range: 11-13.8V DC |
| Receiver sensitivity | MCS0: -96dbm MCS7: -72dbm |
| Software
Features |
|
| Operating mode | AP/Station/WISP/P2MP/WDS Repeater/Router |
| Enable/Disable Wireless Radio | Support |
| SSID Hidden | Support |
| Wireless Client isolation | Support |
| SSID Isolation | Support |
| Channel Bandwidth | 10/20/30/40MHz |
| Client Limitation for SSID | Support |
| Wireless Access Control | Support |
| Weak Signal Client Limitation | Support |
| Transmission Power | Adjustable power by 1dBm |
| WMM Capable | Support |
| APSD Capable | Support |
| Wireless Security | 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2 |
| Transparent Bridge | Support |
| VLAN Tagging for SSID | Support |
| DHCP Server | Support |
| VPN Pass-Through | PPTP,L2TP |
| Remote Web access | Support |
| Schedule Reboot | Support |
| Page Timeout | Support |
| Ping Watchdog | Support |
| Dyndns | noip, dyndns.org |
| Network Diagnoses | Ping, Traceroute, Signal Scan |
| Time & Date Setting | Support |
| Firmware upgrade | Support |
| Backup/Restore Configuration | Support |
| Username Management | Support |
| System Log | Support |
| Managed By Controller | PC Software -- CPE Controller |
| Others |
|
| Package Contents | 1*2km Point to Point Outdoor CPE 1*Power Adapter 1*PoE Injector 2*Plastic Staps 1*Quick Installation Guide |
| Operating Temperature | -30℃ ~ 60℃ |
| Storage Temperature | -40℃ ~ 70℃ |
| Operating Humidity | 10%~90% non-condensing |
| Storage Humidity | 10%~90% non-condensing |
| Default login IP | 192.168.2.1 |
| Default Login Username | admin |
| Default Login Password | admin |
| Certifications | FCC/CE/RoHS |
| Videos |
|---|
| -- No videos available -- |
| Files |
|---|
| IP-COM CPE6 Datasheet |
| IP-COM CPE6 Quick Start Guide |
| IP-COM CPE6 User manual |
| Links* |
|---|
| IP-COM website |
| IP-COM support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q & A forum
Be the first to ask a question and help others interested in this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved IP-COM resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
