TREND Networks PoE Pro Data Cable and PoE Verifier

The TREND Networks PoE Pro R158004 is a data cable and PoE tester that eliminates guesswork when installing, maintaining and troubleshooting networks where PoE is deployed. Previously technicians had to understand all the various standards, device power outputs and cable lengths to be sure a device will operate successfully. The PoE Pro identifies the Class of the PoE source and power available to a PoE device regardless of cable length, cable quality or other factors. Provides a clear pass/fail result to IEEE 802.3af/at/bt standards.

Do you have enough power at the device location? PoE Pro displays the maximum power available at the device location including the maximum watts, Class (0-8), Voltage, Type (af/at/bt) and 2/4 pair operation.

Some switches or injectors may provide power that exceeds their IEEE Class rating. The PoE Pro can test this ability with its extended power test. Simply press the network button for 3 seconds and the PoE PRO will increase power demand up to a maximum of 90 watts.

Interface

Features:

• Supports RJ45, RJ11/12 and Coax connections
• Wiremap for miswires, split pairs, shorts and opens
• Shielded cable testing
• Cable length
• Distance to Open / Short (TDR)
• Analog and digital tone generator
• Compatible with common cable tracing probes
• Port Blink
• Media Service Detection - Ethernet, analogue / digital telephone service and ISDN
• Ethernet Speed Detection 10/100/1000 Mb/s
• Instantaneous results - results are shown as soon as you plug in the cable
• Larger 2.9” display
• Backlight
• Over-voltage protection
• Validate PoE to ensure your device & network performs successfully Supports 802.3bt
• Supports 802.3bt High Power PoE (up to 90 watts)
• Compatible with most non-standard PoE injectors
• Identifies PSE Type (af/at/bt)
• Identifies PSE Class - 0 to 8
• Determines maximum power available (watts) at the device location
• Displays voltage
• Displays how many pairs have PoE