Ajax Kit 2 Cam Plus Wireless Alarm System

Hub 2 Plus Wireless Alarm Pane

The Ajax Hub 2 Plus is a wireless alarm panel which features four communication channels: Ethernet, Wi-Fi and two SIM cards (2G/3G/4G (LTE)), a new powerful processor, tripled RAM capacity and doubled flash memory capacity. The Hub Plus is the absolute leader in field in the number of communication channels: the control panel can be connected to the Internet via Wi-Fi, Ethernet, WCDMA, and GSM. Taken together, these functions ensure ultra-stable connection and instant alarm sending to the owner’s smartphone and the Central Monitoring Station.

The Hub 2 Plus is equipped with a GSM module with two SIM-card slots that support 2G/3G/4G(LTE). Now you can use SIM-cards of two different communications providers without any risk of communications failures. The Hub instantly switches between 2G and 3G networks. If one SIM card does not respond, the second one is activated automatically.

The Hub 2 Plus is ready to operate out of the box. All communication modules, power supply, and backup battery are already installed. To start setting up the system, you need to connect the device to the power supply and the Internet, insert the SIM cards, and scan the QR code through the app. With the SmartBracket mounting panel, there is no need to disassemble the device body during installation.

Connecting security devices, video cameras, users, testing the radio signal, creating groups and scenarios, even sending a request for connection to the CMS - all system settings are always available in the Ajax apps. Whether you are at the site or not.

MotionCam Wireless PIR Detector with Camera

The Ajax MotionCam is a wireless motion detector with visual alarm verification for indoor use. It operates for up to 4 years on bundled batteries, detects movement at up to 12 meters, ignores animals, but recognizes a human movement instantly. MotionCam works within Ajax security systems, connecting to a hub through the two secure radio protocols. The detector uses Jeweller to transmit alarms and events, and Wings to transmit photos. Wireless coverage may reach up to 1,700 m line-of-sight.

DoorProtect window/door sensors

The Ajax DoorProtect is a wireless window/door sensor that notifies of first signs of room intrusion by means of an open door or window. It features British-made hi-end reed switches on which the magnetic field acts and can operate in the transmitter mode, sending a signal from the wired sensor to the hub.

The DoorProtect consists of two modules - detector and magnet. The set includes two magnets: the big magnet is installed at a distance of up to 2 cm, and the small magnet up to 1 cm. Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Wireless Alarm KeyPad

The Ajax KeyPad is a wireless indoor touch-sensitive keyboard managing the Ajax security system. With this device, the user can arm and disarm the system and see its security status. The KeyPad is protected against attempts to guess the passcode and can raise a silent alarm when the passcode is entered under duress.

Connecting to the Ajax security system via a secured Jeweller radio protocol, the KeyPad communicates with the hub at a distance of up to 1,700 m in line of sight.

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the keypad. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

HomeSiren Indoor Sounder

The Ajax HomeSiren is a wireless indoor sounder that loudly notifies of an alarm during detector activation, with the capacity up to 105 dB. 

Developed only for indoor use. It can be quickly installed and set up, is furnished with a LED (plus allows connecting an external LED), and can operate up to 5 years from a battery.

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the siren. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.