Ajax GlassProtect S (8PD) Glass Break Detector
The Ajax GlassProtect S is a wireless indoor glass break detector which can recognise the sound of shattering the glass at a distance of up to 9m. (Read more)
PRODUCT DETAILS
The Ajax GlassProtect S wireless indoor glass break detector is part of the Ajax Superior range. Forget about the typical problem of glass break detectors — false alarms caused by barking dogs, traffic, water splashing, and extraneous noise. GlassProtect S Jeweller has a unique DualTone digital algorithm designed to minimize false alarms. The detectorʼs microphone responds only to vibrations characteristic of the glass breaking sound. You can adjust one of three sensitivity levels and run the test to check if everything works properly.
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Expanded features, reliability, and compliance for PROs
Superior is a game changer among wireless devices with improved certification compliance. Superior devices are stuffed with cutting-edge hardware, providing exceptional features and effortless installation. All UK-based installers and companies with PRO accounts have full access to Superior product line.
Features:
- 9m detection range
- Designed to only react to glass breaking
- Ignores thunder, dogs barking and noise outside the window
- Grade II
- Matt Finish
- Authentication to prevent forgery
- Jamming detection and communication channels encryption
- Tampering alarm
- Operates up to 7 years without battery replacement
- Quick and easy installation
Compatibility |
|
Control panels |
Hub Plus Hub 2 (2G) Hub 2 (4G) Hub 2 Plus Hub Hybrid (2G) Hub Hybrid (4G) |
Range extenders |
ReX ReX 2 |
Communication |
|
Jeweller communication technology |
Proprietary wireless communication
technology to transmit commands, alarms, and events. Key features: Two-way communication. Advanced sabotage protection. Block encryption featuring a dynamic key. Instant notifications. Remote configuration in the Ajax apps. |
Frequency bands |
868.0–868.6 MHz |
Maximum effective radiated power
(ERP) |
up to 20 mW Automatic power control to reduce power consumption and noise interference. |
Radio signal modulation |
GFSK |
Radio signal range |
up to 1,000 m Between detector and control panel (or range extender) in an open space. |
Encrypted communication |
All the data stored and transmitted are
protected by block encryption with a dynamic key. |
Frequency hopping |
Radio communication uses frequency hopping to prevent
interception and jamming. |
Detection |
|
Sensitive element |
electret microphone |
Glass break detection distance |
from 0.3 to 9 m |
Glass break detection angles |
horizontal: 180° vertical: N/A |
Sensitivity |
3 levels Adjusted by PRO or user with admin rights in the Ajax app. |
False alarm prevention |
DualTone Two-factor glass break verification software algorithm: by low and high frequencies. |
Input to connect an additional detector |
Wired detector with the normally closed (NC) contact
type. |
Glass break
characteristics |
|
Minimum glass size |
400 × 400 mm Detection distance is up to 9 m for all glass types when the High sensitivity level is selected. |
Type of glass and its thickness |
standard pane — 4 mm insulated glass — 4 mm tempered glass — 6 mm |
Recommendations |
|
Tamper alarm |
Notifications on attempts to detach the detector from the
surface or remove it from the mounting panel. |
Holding screw |
to secure the detector on SmartBracket |
Protection against spoofing |
device authentication |
Communication loss detection |
after 36 s Detection time depends on the Jeweller or Jeweller/Fibra settings. |
Power supply |
|
Battery |
1 × CR123A Pre-installed. |
Type |
Type C. |
Calculated battery life |
up to 7 years |
Detector’s operating voltage range |
2.1−3.3 V⎓ |
Detector’s nominal operating voltage |
3 V⎓ |
Quiescent detector’s current consumption at nominal
voltage |
0.011 mA |
Maximum detector’s current consumption at nominal
voltage |
2.5 mA |
Full capacity |
1,600 mAh |
Low battery voltage |
2.4 V⎓ |
Low battery recovery voltage |
2.7 V⎓ |
End-of-life battery voltage |
2 V⎓ |
End-of-life battery capacity |
250 mAh |
Manufacturer |
Panasonic |
Enclosure |
|
Dimensions |
103 × 22 × 21 mm |
Weight |
40 g |
Operating temperature range |
from −10°C to +40°C |
Operating humidity |
up to 75% |
Protection class |
IP50 |
Complete set |
GlassProtect S Jeweller SmartBracket mounting panel with holding screw CR123A battery (pre-installed) Outside-mounted terminal clamp Installation kit Quick start guide |
18912 | GlassProtect S Black | In stock | |
18913 | GlassProtect S White | In stock |
Videos |
---|
Files |
---|
Ajax GlassProtect S Datasheet |
Ajax GlassProtect S User Manual |
Links* |
---|
Ajax website |
Ajax support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.