Mean Well 12v 1.25A 15W Din-Rail Power Supply
Mean Well
- Din Rail Mount
- Isolation class II
- 3 Year Warranty
The Mean Well HDR-15-12 is an economical, ultra-slim 12v 1.25A 15W Din-Rail Power Supply designed for use on TS-35/7.5 or TS-35/15 mounting rails. (Read more)
PRODUCT DETAILS
The Mean Well HDR-15-12 is an economical, ultra-slim 12v 1.25A 15W Din-Rail Power Supply designed for use on TS-35/7.5 or TS-35/15 mounting rails. The slimline body is 17.5mm wide allowing for space saving inside the cabinet, and features an LED indicator for Power On.
The HDR-15-12 has a DC output adjustment range of 10.8-13.8V and Universal input 85-264VAC.
Features:
- Universal input 85-264VAC (277VAC available)
- Isolation class II
- Pass LPS (Limited power source)
- Cooling by free air convection
- Din rail TS-35/7.5 or 15 mountable
- LED indicator for power on
- 3 year warranty
| Output | |||
| DC VOLTAGE |
12V |
||
| RATED CURRENT |
1.25A |
||
| CURRENT RANGE |
0 ~ 1.25A |
||
| RATED POWER |
15W |
||
| RIPPLE & NOISE (max.) Note.2 |
120mVp-p |
||
| VOLTAGE ADJ. RANGE |
10.8 ~ 13 .8 V |
||
| VOLTAGE TOLERANCE Note.3 |
±1.0% |
||
| LINE REGULATION |
±1.0% |
||
| LOAD REGULATION |
±1.0% |
||
| SETUP, RISE TIME |
2000ms, 80ms/230VAC 2000ms, 80ms/115VAC at full load |
||
| HOLD UP TIME (Typ.) |
30ms/230VAC 12ms/115VAC at full load |
||
| INPUT |
|||
| VOLTAGE RANGE |
85 ~ 2 VAC (277VAC
operational) 120 ~ 3 VDC (390VDC operational) |
||
| FREQUENCY RANGE |
47 ~ 63Hz |
||
| EFFICIENCY (Typ.) |
85% |
||
| AC CURRENT (Typ.) |
0.5A/115VAC 0.25A/230VAC |
||
| INRUSH CURRENT (Typ.) |
COLD START 25A/115VAC 45A/230VAC |
||
| PROTECTION |
|||
| OVERLOAD |
110 ~ 145% rated output
power Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed Constant current limiting within 50% - 100% rated output voltage, recovers automatically after fault condition is removed |
||
| OVER VOLTAGE |
14 .2 ~ 16 .2 V Protection type : Shut off o/p voltage, clamping by zener diode |
||
| ENVIRONMENT |
|||
| WORKING TEMP. |
-30 ~ +70℃ (Refer to
"Derating Curve") |
||
| WORKING HUMIDITY |
20 ~ 90% RH
non-condensing |
||
| STORAGE TEMP., HUMIDITY |
-40 ~ +85℃, 10 ~ 95% RH
non-condensing |
||
| TEMP. COEFFICIENT |
±0.03%/℃ (0 ~ 50℃) RH
non-condensing |
||
| VIBRATION |
10 ~ 500Hz, 2G
10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting:
Compliance to IEC60068-2-6 |
||
| OPERATING ALTITUDE |
2000 meters |
||
| OVER VOLTAGE CATEGORY |
Ⅲ; According to EN61558,
EN50178,EN60664-1, EN62477-1 |
||
| SAFETY & EMC (Note
4) |
|||
| SAFETY STANDARDS |
UL62368-1, UL508, TUV BS
EN/EN61558-2-16, BS EN/EN61558-1, IEC62368-1, EAC TP TC 004, BSMI
CNS14336-1 approved; Design refer to TUV BS EN/EN62368-1 |
||
| WITHSTAND VOLTAGE |
I/P-O/P:4KVAC |
||
| ISOLATION RESISTANCE |
I/P-O/P:100M Ohms / 500VDC
/ 25℃/ 70% RH |
||
| EMC EMISSION |
Parameter |
Standard |
Test Level /
Note |
| Conducted |
BS EN/EN55032(CISPR32),
CNS13438 |
Class B |
|
| Radiated |
BS EN/EN55032(CISPR32),
CNS13438 |
Class B |
|
| Harmonic Current |
BS EN/EN61000-3-2 |
Class A |
|
| Voltage Flicker |
BS EN/EN61000-3-3 |
------- |
|
| EMC IMMUNITY |
BS EN/EN55035, BS
EN/EN61000-6-2, BS EN/EN61204-3 |
||
| Parameter |
Standard |
Test Level /Note |
|
| ESD |
BS EN/EN61000-4-2 |
Level 3, 8KV air; Level 2, 4KV contact, criteria A |
|
| Radiated Susceptibility |
BS EN/EN61000-4-3 |
Level 3, criteria A |
|
| EFT/Burest |
BS EN/EN61000-4-4 |
Level 3, criteria A |
|
| Surge |
BS EN/EN61000-4-5 |
Level 4,2KV/L-N, criteria A |
|
| Conducted |
BS EN/EN61000-4-6 |
Level 3, criteria A |
|
| Magnetic Field |
BS EN/EN61000-4-8 |
Level 4, criteria A |
|
| Voltage Dips and interruptions |
BS EN/EN61000-4-11 |
＞95% dip 0.5 periods, 30% dip 25 periods, ＞95% interruptions 250 periods |
|
| OTHERS |
|||
| MTBF |
3724.3K hrs min. Telcordia SR-332 (Bellcore) ; 1166.1K hrs min. MIL-HDBK-217F (25℃) |
||
| DIMENSION |
17.5*90*54.5mm
(W*H*D) |
||
| PACKING |
74g;160pcs/12.9Kg/1.09CUFT |
||
| NOTE |
1. All parameters MOT
specifically mentioned are measured at 230VAC input, rated load and
25°C of ambient temperature 2. Ripple & noise are measure at 20MHz of bandwidth by using a 12'' twisted pair wire terminated with a 0.1μf & 47μf parallel capacitor 3. Tolerance: Includes set up tolerance, line regulation and load regulation 4. The power supply is considered as an indipendent unit, but the final equipment still needs to re-confirm that the whole system complies with the EMC directives. 5. The ambient temperature derating of 3.5°C/1000m with fanless models and 5°C/1000m with fan models fpr operating altitude higher than 2000m (6500ft) |
||
| Videos |
|---|
| No videos available |
| Files |
|---|
| Datasheet |
| Links* |
|---|
| Mean Well website |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
