Veracity OUTREACH MAX VOR-ORM Internal IP & PoE extender

The Veracity VOR-ORM OUTREACH MAX is an Ethernet extender that can double the length of a 10/100 Ethernet connection to 200m, or be daisy chained for longer runs, making it ideal for large scale CCTV or networking installations. The OUTREACH Max is powered by PoE, and will forward PoE to other devices that are compatible with IEEE 802.3af, which is the universal POE standard for low power network devices such as fixed IP cameras. In addition, OUTREACH Max is compatible with POE Plus (IEEE802.3at) and higher power 4-pair POE (IEEE 802.3bt) up to 90W.

Simple to install

Fitting OUTREACH Max is simple because no set-up is required. Its only connections are two RJ45 network ports, both of which immediately self-configure for 100Base-TX operation. POE power is automatically
transferred between connected equipment. No local power supply connection is needed, because OUTREACH Max is powered by POE.

OUTREACH Max can easily be located anywhere along the network cable, as long as no single length of cable is greater than 100 metres. For example, to extend the network connection between a POE switch and an IP camera to 170 metres, an OUTREACH Max could be installed 90 metres from the switch. A further 80 metres of cable would run from the OUTREACH Max to the camera.

Application

A single OUTREACH Max doubles the cable range to a POE IP Camera. Each cable segment can be up to 100 metres.

If there is no POE available, upgrade the link with Veracity’s low cost POE injector OUTSOURCE.

If POE and network extension beyond 200 metres (656 ft) is required, more than one OUTREACH Max may be installed in series. For example, a 300 metre (984ft) connection between a POE switch and a 10 watt
IP camera can be achieved by fitting two OUTREACH Max units at 100 metre intervals along the cable. The maximum extension distance depends on how much power is required and which POE source is used. 

For longer Ethernet runs, Veracity recommends theLONGSPAN long distance point-to-point devices, which can achieve 100Base-TX connections with POE at up to 820m (2,690ft).

Which type of OUTREACH do I need?

Features:

• Instantly doubles cable range to 200 metres
• No local power is required
• Full unrestricted network bandwidth
• Universal 10/100 compatibility (Gigabit available)
• Extends POE and POE Plus up to 90 watts
• Integrated mounting holes