How to install Cat 5e UTP Solid Armoured SWA
Hi Can someone please tell me how to install Cat 5e UTP Solid Armoured SWA to Category 6A UTP inline junction box, I follow the wiring for the Ethernet cable but it does not work. Thanks
1 Answer
We would recommend using an inline coupler at either end of the SWA cable as SWA network cable is difficult to terminate using plugs or faceplates.
Join the SWA to a standard Cat 5e or 6 cable using an inline coupler as shown in the example below.
Different brands of couplers are wired in different ways so it is important to follow the instructions provided with the coupler. You can often find that the coupler has labelling on it's base to show where each core goes. The coupler available from Connectec here is wired as follows
I'm looking to make a similar connection from an SWA CAT 6 cable - do I need to earth the SWA when I make a glanded connection & if so, how? Given there won't be an earth to connect to in the box. I will not be running the cable next to electrical cables - Adam 4 days
There is no need to earth the armour on a data cable as there is little to no voltage present on the cable - yesterday
