Hikvision DS-3E1105P-EI V2 4+1 Port 100Mbps Smart Managed PoE Switch
Hikvision
- 10/100 Mbps ports
- PoE management
- Smart Managed
The Hikvision DS-3E1106HP-EI V2 is a 4+1 port managed desktop PoE (Power over Ethernet) switch provides power and data over a single Ethernet cable. (Read more)
PRODUCT DETAILS
The Hikvision DS-3E1105P-EI V2 is a 4+1 port managed desktop PoE (Power over Ethernet) switch provides power and data over a single Ethernet cable via 4 x 100 Mbps PoE RJ45 ports and 1 x 100 Mbps network RJ45 uplink port, making it perfect for small-scale IP surveillance networks. It can automatically detect and supply power to any compatible PoE camera allowing you to expand your network without separate power cables, making installation quicker, easier and more cost effective.
Interface
| No | Indicator/Port |
Description |
|---|---|---|
| 1 | PWR Indicator |
Solid on: The switch
is powered on normally Unlit: No power supply is connected or power supply is abnormal |
| 2 | PoE-MAX Indicator |
Solid on/Flashing: The
output power of the switch is about to reach or has reached the
upper limit. The power supply may be abnormal if more devices are
connected Unlit: The switch does not supply power to a powered device (PD), or supplies power to a PD normally and its output power does not reach the upper limit. (About 5 seconds after the output power of the switch returns to normal, the PoE-MAX indicator will be unlit.) |
| 3 | LINK/ACT Indicator |
Solid on: The port is
connected. Flashing: The port is transmitting data Unlit: The port is disconnected or connection is abnormal |
| 4 | PoE Indicator |
Solid on: The switch
supplies power to a PD normally Unlit: The switch is disconnected from a PD or power supply is abnormal |
| 5 | 10/100 Mbps PoE RJ45 Port |
Used for connection to a PD via a
network cable |
| 6 | 10/100 Mbps RJ45 Port |
Used for connection to another device
via a network cable |
| 7 | Reset Button |
Used for restoring all the
configurations of the switch to the default settings |
| 8 | Grounding Terminal |
Used for connection to the grounding
cable to protect the switch from lightning |
| 9 | Power Supply |
Use the attached power cord and power
adapter to connect the switch to a socket |
Features:
- 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
- 6 KV surge protection for PoE ports.
- Total PoE Power Budget 60W
- Support 802.1Q VLAN
- Support PoE watchdog to detect and restart the cameras that do not respond
- Support STP/RSTP Loop prevention
- Support cable detection to locate failure
- Up to 300 m Long Range PoE Transmission
| General | |
| Shell | Metal material |
| Net Weight | 0.26 kg (0.573 lb) |
| Gross Weight | 0.75 kg (1.65 lb) |
| Dimensions (W × H × D) | 121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'') |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Storage Temperature | -40 °C to 85 °C (-40 °F to 185 °F) |
| Operating Humidity | 5% to 95% (no condensation) |
| Relative Humidity | 5% to 95% (no condensation) |
| Power Supply | 54VDC, 1.2A |
| Installation Mode | Desk-Mounted Wall-Mounted |
| Max. Power Consumption | 65 W |
| Power Consumption in Idle | 0.9 W |
| Surge Protection | 6 KV |
| Network Parameters | |
| Ports | 4 × 10/100 Mbps PoE port, 1 × 10/100 Mbps RJ45 port |
| MAC Address Table | 2 K |
| Switching Capacity | 1 Gbps |
| Packet Forwarding Rate | 0.74 Mpps |
| Internal Cache | 768 Kbits |
| PoE Power Supply | |
| PoE Standard | IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin | End-span: 1/2(-), 3/6(+) |
| PoE Port | PoE: Ports 1 to 4 |
| Max. Port Power | 30 W |
| PoE Power Budget | 60 W |
| Software Function | |
| Long Range | Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
| VIP Port | Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient. |
| Port Isolation | Ports 1 to 4: port isolation mode to improve network
security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| PoE Watchdog | Ports 1 to 4: auto detect and restart the cameras that do not respond. |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports
to form a logical port for load balancing, bandwidth expansion, and
port protection. Support static link aggregation. Support 1 aggregation group(s). |
| Loop Prevention | Loop prevention is used to prevent the switching network from
forming loops, which will seriously affect network communication.
Disabled by default. Support 802.1D STP. Support 802.1w RSTP. |
| VLAN | VLAN is used for network scale planning and network health
improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. |
| HPP | Support one-click activation and remote management via
Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
| System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. |
| Approval | |
| EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
| Videos |
|---|
| No videos available |
| Files |
|---|
| Hikvision DS-3E1105P-EI V2 Datasheet |
| Hikvision DS-3E1105P-EI V2 Quick Start Guide |
| Hikvision DS-3E1105P-EI V2 User Manual |
| Links* |
|---|
| Hikvision website |
| Hikvision support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
