Planet IGS-1020TF Industrial 8 Port + 2 SFP Gigabit Switch
- 8 x 1000 Mbps RJ45
- 2 x 1000 Mbps SFP
- 3 year guarantee
The Planet IGS-1020TF is an IP30 rated, DIN or wall mountable industrial managed Gigabit Switch with 8 10/100/1000Mbps ports, 2 100/1000X SFP ports (Read more)
The Planet IGS-1020TF is a heavy-duty managed 8 port Gigabit switch with a rugged IP30 aluminium case for use in heavy industrial demanding environments. It features 8 x 10/100/1000Mbps copper ports, 2 additional 100/1000X SFP ports and 2 extra 100/1000BASE-X SFP fiber optic interfaces. The IGS-1020TF is an ideal solution for deploying surveillance system, secure control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.
Fibre Optic Link Capability
The IGS-1020TF features 2 mini-GBIC slots which allow the distance to be extended from 55 Metres to 2 Kilometres. Aoto detection is supported along with dual speed, allowing the administrator to choose the most suitable transceiver according to the distance or transmission speed required.
Environmentally Hardened Design
The IGS-1020TF features a IP30 rated metal case which provides a high level of protection against electromagnetic interference and heavy electrical surges that can be found on factory floors and curbside traffic control cabinets. This also allows it to operate under temperature ranging from -40° to 75° C, making it suitable for almost any commercial application.
Dual Power Input
The dual power input system allows for both 12V~48V DC or 24V AC voltages to enhance system reliability and uptime. If power supply 1 fails to work, the hardware failover function will kick in and automatically draw power from the 2nd supply, which keeps the IGS-1020TF running without any loss of operation.
The IGS-1020TF is able to provide power saving up to 50% by incorporating advanced green networking technology and IEEE 802.3az protocols. The Link Down power saving goes beyond IEEE specifications to automatically lower power consumption for a given port when it is not linked. Power usage to the ports can be automatically adjusted when they are shut down or not connected.
- 8-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function
- 2 SFP slots, supporting 1000BASE-X and 100BASE-FX transceiver type auto-detection
- IP30 metal case protection
- DIN rail and wall mount design
- Redundant Power Design
- - 12 to 48V DC, redundant power with polarity reverse protect function- AC 24V power adapter acceptable
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
|Copper Ports||8 x 10/100/1000BASE-T RJ45 TP|
|SFP/mini-GBIC Slots||2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10)|
Compatible with 100BASE-FX SFP
|Switch Processing Scheme||Store-and-Forward|
|Switch Fabric||20Gbps (non-blocking)|
|Switch Throughput (packet per second)||14.88Mpps@64bytes|
|MAC Address Table||4K entries|
|Flow Control||Back pressure for half duplex|
IEEE 802.3x pause frame for full duplex
|Jumbo Frame||9216 bytes|
|Connector||Removable 6-pin terminal block|
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
|Alarm||Provides one relay output for power failure|
Alarm Relay current carry ability: 1A @ DC 24V
|LED Indicator||3 x LED for System and Power:|
Green: DC Power 1
Green: DC Power 2
Red: Power Fault
2 x LED for Per Copper Port (Port-1~Port-8):
Green: 1000 LNK/ACT
2 x LED for Per Mini-GBIC Interface (Port-9 and Port-10):
Green: 1000 LNK/ACT
|ESD Protection||6KV DC|
|Enclosure||IP30 type metal case|
|Installation||DIN rail kit and wall-mount ear|
|Dimensions (W x D x H)||56 x 87 x 135 mm|
|Power Requirements||DC 12~48V or AC 24V|
Redundant power with polarity reverses protection function
|Power Consumption/Dissipation||8.7 watts/29.69BTU|
|-- No videos available --|
|Planet IGS-1020TF Datasheet|
|Planet IGS-1020TF User Manual|
|Planet support site|
Be the first to ask a question and help others interested in this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
Our technical support team are experienced installation engineers with years of field experience.
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
* Qualifying products only, subject to terms. For more information view our delivery information.