Tax based on shipping to United Kingdom gb flag , Change?
Basket 
NEW CLEARANCE
Planet IGS-6325-8UP2S2X Industrial 8+4 Port L3 Managed PoE Switch
fullscreen

Planet IGS-6325-8UP2S2X Industrial 8+4 Port L3 Managed PoE Switch

Rated 0/5   0 reviews | 0 Questions
Planet logo Planet
  • 8 x 10/100/1000BASE-T
  • 2 x 10/1000/2500BASE-X SFP
  • IEEE 802.3bt PoE Plus
Link to videos

The PLANET IGS-6325-8UP2S2X L3 Industrial Managed PoE++ Switch features 8x 10/100/1000BASE-T 802.3bt PoE++ ports & 2x 0/1000/2500BASE-X SFP interfaces (Read more)

Loading
£715.68
£596.40 Ex VAT
Ordered on Request
Free delivery availale
Orders placed before 15:30 will be processed today
Product Code16835
ModelIGS-6325-8UP2S2X
SPECIAL ORDER / NON-RETURNABLE ITEM
More Information
RELATED PRODUCTS

PRODUCT DETAILS

Complying with IEEE 802.3bt Power over Ethernet Plus Plus technology, the PLANET IGS-6325-8UP2S2X L3 Industrial Managed PoE++ Switch features eight 10/100/1000BASE-T 802.3bt PoE++ ports with each port powering up to 95 watts, two 10G SFP+ ports and two 100/1000/2500BASE-X SFP interfaces in a rugged IP30 metal case for stable operation in heavy industrial demanding environments. It supports rich PoE operation modes including 90-watt 802.3bt type-4 PoE++ ports, 95-watt PoH (Power over HD-BASE-T) mode and 4-pair force mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field.

Being able to operate under wide temperature range from -40 to 75°C, the IGS-6325 PoE++ Switch series can be placed in almost any difficult environment. The IGS-6325 PoE++ Switch series also allows either DIN rail or wall mounting for efficient use of cabinet space.


Features:

  • Physical Port
    • 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with 802.3bt PoE++ Injector function
    • 2 100/1000/2500BASE-X SFP slots for SFP type auto detection
    • 2 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-X SFP and 2500BASE-X SFP
    • One RJ45-to-RS232 console interface for basic management and setup
  •  
    Industrial Hardened-design
    • Dual power input, redundant power with reverse polarity protection
    • - DC 48 to 56V input- Active-active redundant power failure protection- Backup of catastrophic power failure on one supply- Fault tolerance and resilience
    • DIN-rail and wall-mountable design
    • IP30 aluminum case 
    • Supports 6000V DC Ethernet ESD protection
    • -40 to 75 degrees C operating temperature
  •  
    Digital Input and Digital Output
    • 2 Digital Input (DI)
    • 2 Digital Output (DO)
    • Integrate sensors into auto alarm system
    • Transfer alarm to IP network via email and SNMP trap
  •  
    802.3bt Power over Ethernet
    • Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type-4 PSE
    • Backward compatible with IEEE 802.3at/af PD device
    • Up to 8 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE++ devices powered
    • Supports PoE power up to 95 watts for each PoE port
    • Total of 360-watt PoE budget
    • Auto detects powered device (PD)
    • Circuit protection prevents power interference between ports
    • Remote power feeding up to 100m
    • PoE management features
    • - Total PoE power budget control- Per port PoE function enable/disable- PoE admin-mode control- PoE port power feeding priority- Per PoE port power limit- PD classification detection

    • - PoE extend mode control to support power feeding up to a distance of up to 160 meters
    • Intelligent PoE features
    • - Temperature threshold control- PoE usage threshold control- PD alive check- PoE schedule
  •  
    Layer 3 IP Routing Features
    • IP dynamic routing protocol supports OSPFv2
    • IPv4/IPv6 hardware static routing
    • Routing interface provides per VLAN routing mode

  • Layer 2 Features
    • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
    • Storm Control support
    • - Broadcast/Multicast/Unicast
    • Supports VLAN
    • - IEEE 802.1Q tagged VLAN- Up to 4000 VLANs groups, out of 4095 VLAN IDs

    • - Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)- Private VLAN Edge (PVE)- Protocol-based VLAN- MAC-based VLAN- Voice VLAN - GVRP (GARP VLAN Registration Protocol)
    • Supports Spanning Tree Protocol
    • - IEEE 802.1D Spanning Tree Protocol (STP)- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN- BPDU Guard
    • Supports Link Aggregation
    • - 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (static trunk)- Maximum 4 trunk groups with 4 ports per trunk group - Up to 40Gbps bandwidth (duplex mode)
    • Provides port mirror (many-to-1)
    • Port mirroring to monitor the incoming or outgoing traffic on a particular port 
    • Loop protection to avoid broadcast loops
    • Link Layer Discovery Protocol (LLDP)
    • Compatible with Cisco uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
    • Supports G.8032 ERPS (Ethernet Ring Protection Switching)
    • IEEE 1588 and Synchronous Ethernet network timing
  •  
    Quality of Service
    • Ingress Shaper and Egress Rate Limit per port bandwidth control
    • 8 priority queues on all switch ports
    • Traffic classification
    • - IEEE 802.1p CoS- IP TOS/DSCP/IP precedence- IP TCP/UDP port number- Typical network application
    • Strict priority and Weighted Round Robin (WRR) CoS policies
    • Supports QoS and In/Out bandwidth control on each port
    • Traffic-policing on the switch port
    • DSCP remarking

  • Multicast
    • Supports IPv4 IGMP snooping v1, v2 and v3
    • Supports IPv6 MLD snooping v1 and v2
    • Querier mode support
    • IPv4 IGMP snooping port filtering
    • IPv6 MLD snooping port filtering
    • MVR (Multicast VLAN Registration)
  •  
    Security
    • Authentication
    • - IEEE 802.1X Port-based/MAC-based network access authentication- Built-in RADIUS client to cooperate with the RADIUS servers- TACACS+ login users access authentication- RADIUS/TACACS+ users access authentication- Guest VLAN assigns clients to a restricted VLAN with limited services
    • Access Control List
    • - IP-based Access Control List (ACL)- MAC-based Access Control List
    • Source MAC/IP address binding
    • DHCP snooping to filter distrusted DHCP messages
    • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
    • IP Source Guard prevents IP spoofing attacks
    • IP address access management to prevent unauthorized intruder

  • Management
    • IPv4 and IPv6 dual stack management
    • Switch Management Interfaces
    • - Console and Telnet Command Line Interface- HTTP web switch management- SNMP v1 and v2c switch management- SSH, TLS, SSL and SNMP v3 secure access
    • SNMP Management
    • - Four RMON groups (history, statistics, alarms, and events)

    • - SNMP trap for interface Link Up and Link Down notification
    • IPv6 IP address/NTP/DNS management
    • Built-in Trivial File Transfer Protocol (TFTP) client
    • BOOTP and DHCP for IP address assignment
    • System Maintenance
    • - Firmware upload/download via HTTP/TFTP- Reset button for system reboot or reset to factory default

    • - Dual Images
    • DHCP Relay
    • DHCP Option 82
    • DHCP Server
    • User Privilege levels control
    • Network Time Protocol (NTP)
    • Network Diagnostic
    • System Maintenance
    • - SFP-DDM (Digital Diagnostic Monitor)- Cable diagnostic technology provides the mechanism to detect and report potential cabling issues- ICMPv6/ICMPv4 remote ping
    • SMTP/Syslog remote alarm
    • System Log
    • PLANET Smart Discovery Utility for deployment management
YOU MIGHT ALSO NEED
Loading
 
 
 
 
 
Loading
 
 
 
 
 
Loading
 
 
 
 
 
Loading
 
 
 
 
 
Loading
 
 
 
 
 
Loading
 
 
 
 
 
SPECIFICATIONS
Hardware
Copper Ports
8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP Ports
2 1000BASE-SX/LX/BX SFP slot interfaces (Port-9 and Port-10) Compatible with 100BASE-FX SFP and 2500BASE-X SFP
SFP+ Ports
2 10GbBASE-SR/LR SFP+ slot interfaces (Port-11 to Port-12) Compatible with 1000BASE-X SFP and 2500BASE-X SFP
PoE Injector Ports
8 ports with 802.3bt PoE++ injector function with Port-1 to Port-8
Console
1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Switch Architecture
Store-and-Forward
Switch Fabric
60Gbps/non-blocking
Throughput (packet per second)
44.64Mpps@ 64 bytes packet
Address Table
16K entries, automatic source address learning and aging
Shared Data Buffer
32Mbits
Jumbo Frame
10Kbytes
SDRAM
512Mbytes
Flash Memory
64Mbytes
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
Alarm
One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
Digital Input (DI)
2 digital input:
Level 0: -24~2.1V (±0.1V)
Level 1: 2.1~24V (±0.1V)
Input load to 24V DC, 10mA max.
Digital Output (DO)
2 digital output:
Open collector to 24VDC, 100mA
Enclosure
IP30 aluminum case
Installation
DIN-rail or wall mounting
Dimensions (W x D x H)
76.8 x 107.3 x 152 mm
Weight
1,152g
Power Requirements
Dual DC 48~56V, 7.5A max.
(>52V DC for 802.3bt PoE++ output recommended)
Power Consumption
Max. 29 watts/98.96BTU@56V DC input (System on)
Max. 401 watts/1,368.27BTU@56V DC input (Full loading with 802.3bt PoE++ function)
ESD Protection
Air 8KV DC
Contact 6KV DC
Surge Protection
4KV DC
LED Indicator
System:
Power 1 (Green), Power 2 (Green)
Fault Alarm (Red)
Ring (Green), Ring Owner (Green)
DIDO (Red)Per 10/100/1000T RJ45 PoE++ Port:
1000Mbps LNK/ACT (Green)
10/100Mbps LNK/ACT (Amber)
802.3bt PoE++-in-use x 1 (Green)
802.3at/af PoE-in-use x 1 (Amber)
Per SFP Interface:
1000 LNK/ACT (Green)
100 LNK/ACT (Amber)
Per SFP+ Port:
10Gbps LNK/ACT (Green)
1Gbps LNK/ACT (Amber)
PoE Usage:
80W, 160W, 240W, 320W (Amber)
Power Over Ethernet
PoE Standard
IEEE 802.3bt PoE++ Type-4 PSE
Backward compatible with 802.3at PoE+ PSE
PoE Power Supply Type
802.3bt
UPOE/POH
End-span
Mid-span
Force
PoE Power Output
802.3bt PoE++
- Per port 52V~56V DC (depending on the power supply), max. 90 watts UPoE(PoH)
- Per port 52V~56V DC (depending on the power supply), max. 95 watts IEEE802.3at Standard
- Per port 52V~56V DC (depending on the power supply), max. 36 watts Force
- Per port 52V~56V DC (depending on the power supply), max. 60 watts
Power Pin Assignment

End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
802.3bt/UPoE: 1/2(-), 3/6(+),4/5(+), 7/8(-)
PoE Power Budget
360W maximum (depending on power input)
PoE Ability PD @ 12.5 watts
8 units
PoE Ability PD @ 25 watts
8 units
PoE Ability PD @ 51 watts
6 units
PoE Ability PD @ 71 watts
4 units
PoE Management Functions
Active PoE device alive detects
Yes
PoE Power Recycle
Yes, daily or predetermined schedule
PoE Schedule
4 schedule profiles
PoE Extend Mode
Yes, max. 160 to 200 meters
PoE System Management
System PoE Admin control
Total PoE power budget control
Auto power input and PoE budget control
PoE Legacy mode
Over-temperature threshold alarm
PoE usage threshold alarm
PoE Port Management
Port Enable/Disable/Schedule
PoE mode control
- 802.3bt
- UPoE
- 802.3at End-span
- 802.3at Mid-span
Force mode
Port Priority
Layer 2 Functions
Port Configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Port link capability control
Port Status
Display each port’s speed duplex mode, link status, flow control status,
auto negotiation status, trunk status
Port Mirroring
TX/RX/both
Many-to-1 monitor
VLAN
802.1Q tagged VLAN
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
GVRP
Up to 4000 VLAN groups, out of 4095 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP/static trunk
Supports 3 trunk groups with 4 ports per trunk group
Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IGMP Snooping
IPv4 IGMP (v1/v2/v3) snooping
IPv4 IGMP querier mode support
Supports 255 IGMP groups
MLD Snooping
IPv6 MLD (v1/v2) snooping,
IPv6 MLD querier mode support
Supports 255 MLD groups
Access Control List
IP-based ACL/MAC-based ACL
ACL based on:
- MAC Address
- IP Address
- Ethertype
- Protocol Type
- VLAN ID
- DSCP
- 802.1p Priority
Up to 256 entries
Bandwidth Control
Per port bandwidth control
Ingress: 500Kb~1000Mbps
Egress: 500Kb~1000Mbps
QoS
Traffic classification based, strict priority and WRR
8-level priority for switching
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP packet
Synchronization
IEEE 1588v2 PTP (Precision Time Protocol)
- Peer-to-peer transparent clock
- End-to-end transparent clock
Layer 3 Functions
IP Interfaces
Max. 128 VLAN interfaces
Routing Table
Max. 128 routing entries
Routing Protocols
IPv4 hardware static routing
IPv6 hardware static routing
OSPFv2 dynamic routing
Management
Basic Management Interfaces
Console; Telnet; Web browser; SNMP v1, v2c
Secure Management Interfaces
SSHv1/SSHv2, TLS, SSL, SNMP v3
System Management
Firmware upgrade by HTTP protocol through Ethernet network
Configuration upload/download through HTTP
Remote Syslog
System log
LLDP protocol
NTP
PLANET Smart Discovery Utility
SNMP MIBs
RFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
RFC 4293 IP MIB
RFC 4836 MAU-MIB
IEEE 802.1X PAE
LLDP
Standards Conformance
Regulatory Compliance
FCC Part 15 Class A
CE:
EN55032
EN55035
EN 62368-1/IEC 62368-1: 2014
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3ae 10Gb/s Ethernet
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
IEEE 802.3ah OAM
IEEE 802.1ag Connectivity Fault Management (CFM)
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
FRC 3810 MLD v2
RFC 2328 OSPF v2
ITU-T G.8032 ERPS Ring
ITU-T Y.1731 Performance Monitoring
Environment
Operating Temperature
-40 ~ 75 degrees C
Storage Temperature
-40 ~ 85 degrees C
Humidity
5 ~ 95% (non-condensing)
USEFUL FILES AND LINKS
Videos
Files
   IGS-6325-8UP2S2X datasheet
   IGS-6325-8UP2S2X quick start guide
   IGS-6325-8UP2S2X user manual
Links*
Planet website
Planet support site

* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.

QUESTIONS AND ANSWERS

Get expert answers to questions specific to this product below or for more help visit our Q&A forum


Be the first to ask a question and help others interested in this product

REVIEWS

Read customer reviews or submit your review of this product


Thanks for taking the time to review this product.
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.

There are no reviews for this product.


Why buy from Connectec?

Support

SUPPORT

Our technical support team are experienced installation engineers with years of field experience.

service_icon.png

SERVICE

Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.

free_delivery_icon.png

DELIVERY

We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.

partner_icon.png

PARTNERS

We are approved resellers for direct access to manufacturer warranty and support.

* Qualifying products only, subject to terms. For more information view our delivery information.

Compare 0
Google review badge