Ubiquiti NanoSwitch Outdoor 4-port 24V Passive PoE Powered Network Switch
- 1 Gigabit PoE In Port
- 3 Gigabit PoE Out Ports
- Weatherproof Enclosure
The Ubiquiti Nanoswitch N-SW is an unmanaged outdoor switch with four 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, which can be wall or pole mounted (Read more)
PRODUCT DETAILS
The Ubiquiti Nanoswitch N-SW is an unmanaged outdoor switch with four Gigabit Ethernet ports. For its total non‑blocking line rate, the NanoSwitch supports up to 4 Gbps and features a durable, weatherproof form factor which is ideal for outdoor deployment. For quick installation, the compact NanoSwitch can be easily mounted on a pole or wall.
PoE Injector Not Included
Interface
1 Power
LED |
The Power LED will light blue when the
device is connected to a power source |
2PoE LED |
Green:
|
3 Link
LED |
Green:
|
4 PoE in
Port |
RJ45 port supports 10/100/1000 Ethernet
connections and supports 24V, 2-pair passive PoE to power the
switch. For maximum power consumption of 30W, we recommend
supplying power with the POE-24-30W-G-WH PoE adapter (not
included). |
5 Ground Bonding
Point |
The NanoSwitch must be grounded in one
of the following ways:
|
6 PoE Out (Ports 1 -
3) |
RJ45 ports support 10/100/1000 Ethernet
connections and provide passive 24V, 2-pair PoE passthrough for up
to 30W PoE output. !WARNING: PoE is always active. Before connecting a device to a PoE Out port, ensure that the device supports passive PoE and the supplied voltage. !WARNING: Do NOT provide more than a total of 24W PoE output (24V, 1A) per port or 30W total output; otherwise, this will damage the NanoSwitch. |
Installation
- Shielded Category 5 (or above) cabling with drain wire should
be used for all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit: ui.com/toughcable - Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the N-SW and the other at the entry point to the building. The ETH-SP-G2 will absorb power surges and safely discharge them into the ground.
Features:
- (1) Gigabit 24V Passive PoE In Port
- (3) Gigabit 24V Passive PoE Out Ports
- Outdoor, Weather-Resistant Enclosure
- Pole or wall mounted
- PoE Injector Not Included
Mechanical |
||
Dimensions |
196 x 934 x 32 mm (7.73 x 3.68 x 1.28
") |
|
Weight |
269 g (9.5 oz) |
|
Enclosure Characteristics |
White Polycarbonate |
|
Hardware |
||
Processor |
|
|
On-Board Flash Storage |
4Kbits |
|
Total Non-Blocking Line Rate |
4Gbps |
|
TYP. Power Consumption |
1.5W |
|
Power Method |
Passive 24V PoE-in |
|
Supported Voltage Range |
Passive 24V PoE-in |
|
Networking Interfaces |
(4) 10/100/1000 Mbps Ethernet RJ45 |
|
PoE Interfaces |
Passive 24V PoE-in |
|
Max PoE+ Wattage per Port by PSE |
24V@1A per port / Total 24V@1.5A for three ports |
|
Passive PoE Max wattage per port |
24W per port / Total 36W for three ports |
|
Operating Temperature |
-30C ~ 70C |
|
Operating Humidity |
5 to 95% Non-Condensing |
Videos |
---|
No videos available |
Files |
---|
N-SW datasheet |
Links* |
---|
Ubiquiti website |
Ubiquiti support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.