Veracity CAMSWITCH 4 MOBILE VCS-4P1-MOB Low voltage PoE plus switch 12/24V
Veracity
- 4 PoE Ports
- 8.5V - 40V DC
- 80W Power Budget
The Veracity CAMSWITCH 4 VCS-4P1-MOB is a low voltage PoE+ switch designed for use in vehicles, which accepts 40V DC & produces 48V output for PoE+. (Read more)
PRODUCT DETAILS
The Veracity CAMSWITCH 4 VCS-4P1-MOB is a mobile low voltage PoE+ switch designed for use in vehicles. It accepts 8.5V - 40V DC (e.g. a vehicle battery), yet produces 48V output as required for POE. Up to 4 POE devices can be powered by the device with a total power budget of 80W. The uplink port can be connected to a mobile NVR for example.
Ethernet and POE out from 12V/24V
CAMSWITCH 4 Mobile is designed to be powered by a 12V to 24V DC power source (e.g. a vehicle battery). Up to 4 POE devices can be connected and powered by the device with a total power budget of 80W. The fifth port serves as the uplink port to a mobile NVR for example.
Interface
| Number |
Description |
|---|---|
| 1 |
4 or 8 network ports with 802.3at
POE (8 way shown) |
| 2 |
2 data-only ports (2 way shown) |
| 3 |
12V DC / 24V DC Power Input |
- All ports support10/100Base-T Ethernet with auto-negotiation and auto-crossover.
- POE is automatically detected and enabled to compliant devices.
- POE is delivered on the Ethernet data pairs for compatibility with 4-pin external connectors (e.g. M12). Cables should be secured appropriately to prevent vibration.
Power Budget
CAMSWITCH Mobile can deliver up to 80 watts of total camera power at its rated ambient temperature of 50°C.
To calculate the power budget required, add up the power draw in
watts of all POE devices, as given in their datasheets.
(Power classes are not used, and cable losses are already
accounted for.)
Note that the enclosure may become hot in operation.
Restricted access to the product is recommended.
The graph opposite shows the approximate temperature rise with moderate ventilation. Note that restricted ventilation and space can lead to significantly increased ambient temperature.
If the input voltage drops below 12V (for example during engine cranking) the power budget should be reduced as shown on the graph, down to 50 watts at the minimum 8.5V DC input
Features:
- 802.3af POE / 802.3at POE Plus compatible outputs
- Converts a wide input voltage range to POE levels
- Up to 80 watt power budget
- Auto-configuring 10/100 Ethernet switch
- 4 POE ports and 1 uplink port
- Rugged enclosure with adjustable mounting brackets
| POWER INPUT |
|
| Connector |
Detachable screw terminal |
| Voltage |
8.5 - 40V (minimum startup voltage is 10.5V,
supports engine cranking and reduce overdischarge) DC only (contact
Veracity for 24V AC applications) |
| Fusing |
The use of an external fuse is recommended.
Rating: 5 amps for 24V DC or 10 amps for 12V DC supply, slow blow
type |
| POE OUTPUTS |
|
| POE standard |
IEEE 8023.af / IEEE 802.3at compatible Not isolated from DC input; for use in closed system transport applications; connected devices must be IEEE compliant Veracity enhanced POE supports maximum efficiency and range |
| POWER BUDGET |
|
| 24V input |
80 watts total camera power |
| 12V input |
80 watts (reduce to 65 watts for max 30ºC
temperature rise above ambient) |
| <12V input |
60 watts ( reduce to 50 watts if voltage can
drop below 10V ) POE power conversion produces heat; the above limits are for horizontal mounting with ventilation Installation in enclosed spaces will cause additional heating and power limiting Warning: enclosure may become hot in operation |
| ETHERNET
INTERFACE |
|
| Connector |
RJ45, 5-port unmanaged 10/100 switch |
| Rates |
10BASE-T or 100BASE-T and duplex, auto-configuring for
speed |
| Cable |
Straight through or crossover Cat 5, Cat 5e or Cat 6 patch
VCS-8P2-MOB supports VLAN trunking |
| LED INDICATORS |
|
| Green - POE Ports |
Constant - POE enabled Off - No POE requested |
| Green - Non POE Ports |
Constant - Power OK Off - No power |
| Yellow |
Constant - Ethernet OK Blink - Network activity |
|
PHYSICAL/ENVIRONMENTAL |
|
| Dimensions |
L 110mm / 131mm with side clips W 100mm including connectors h
40mm |
| Mounting (brackets inc.) |
5mm mounting holes on 122mm centres |
| Weight |
290g [10.2oz] (VCS-4P1-MOB) / 350g [12.3oz]
(VCS-8P2-MOB) |
| Operating temperature |
-10oC to 50oC [14oF to 122oF] |
| Relative humidity |
Up to 85%, non-condensing |
| Compliance |
CE, FCC, RohS |
| Videos |
|---|
| No videos available |
| Files |
|---|
| Veracity CAMSWITCH 4 VCS-4P1-MOB Datasheet |
| Veracity CAMSWITCH 4 VCS-4P1-MOB Quick Start Guide |
| Links* |
|---|
| Veracity website |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
