Vercacity POINTSOURCE PLUS VAD-PSP Portable PoE Tester
Veracity
- On-Site Configuration
- Customer Demonstrations
- Temporary Installations
The Vercacity POINTSOURCE PLUS VAD-PSP is a portable, rechargeable battery - powered POE (Power over Ethernet) injector, designed for use in the field (Read more)
PRODUCT DETAILS
The Vercacity POINTSOURCE PLUS VAD-PSP is a portable, rechargeable battery - powered POE (Power over Ethernet) injector. It is designed for field use, being compact, easy to handle, with a useful shoulder strap, which leaves your hands free. It can deliver enough power to support a full day’s IP camera installation work.
POINTSOURCE Plus provides a similar functionality to Veracity’s PINPOINT, but includes a built-in POE power source to allow installation and set-up of IP cameras before POE power is available through the network. It can be used with all IEEE 802.3af and IEEE 802.3at POE compatible equipment, (commonly known as POE and POE Plus) including IP cameras, Wireless Access Points, VOIP phones and POE-powered Access Control devices.
POINTSOURCE Plus has a removable, rechargeable battery module which provides enough power for a full day’s installation work. The battery module is removed for recharging purposes.
Application
On Site Configuration
The most common application for POINTSOURCE Plus is the in-situ
configuration, set-up and fine adjustment of IP cameras on an
installation site. By simply connecting a laptop to the IP camera
through POINTSOURCE Plus, all aspects of the camera image
(focus, direction, aperture, zoom, resolution, compression etc.)
can easily be viewed and adjusted.
Battery Life and Status
POINTSOURCE Plus has a battery life of 3 to 5 years, or 200 - 1000 cycles depending upon discharge depth and operating temperature. The battery status indicator shows the remaining charge in steps of 25%. The simple design of the system allows the removable battery to be recharged whilst POINTSOURCE Plus continues to be used with a second battery.
Features:
- Allows local viewing of IP camera on laptop close to camera
- Enables rapid, precise adjustment of camera alignment, focus and field of view
- Includes USB power port for charging phones and tablets
- Removable, rechargeable battery with sufficient power for a full day’s installation work
- Supports all classes of 802.3af and 802.3at POE devices
- Installs and removes in seconds and reduces on-site time
- Additional spare batteries available for rapid swap over
| POWER |
|
| POE output |
48V DC, IEEE 802.3af and 802.3at compliant
(POE and POE Plus) |
| USB output |
5V DC 2.1A, power only, no data |
| Battery type |
Maintenance-free, sealed lead-acid battery
12V, 3.4Ah |
| Battery module |
Removable, rechargeable battery
module |
| Discharge life |
6 hours continuous for a 5 watt camera
(typical) |
| Charger |
Three-stage intelligent (14.4V / 1A / 13.8V
float) |
| NETWORK |
|
| ‘Camera’ Port |
10/100BaseTX with POE |
| ‘Network’ Port |
10/100BaseTX with data only (laptop
connection) |
| LED INDICATORS &
CONNECTORS |
|
| POE status indicator |
Red LED shows ON, flash indicates error, off indicates no
POE |
| Battery status indicator |
Green four-bar display indicates charge level : 100% - 75% -
50% - 25% |
| Network port LEDs |
Green: Link speed Orange: Network activity |
| Network connectors |
2 x RJ45, one with POE |
| USB connector |
1 x USB Type A (power only) |
| Charging connector |
2.1mm jack, centre positive (on battery module – remove unit to
charge) |
|
PHYSICAL/ENVIRONMENTAL |
|
| Dimensions |
L 205mm W 100mm H 150mm (5 5/16 x 3 15/16 x 8 1/16
in) |
| Weight |
Unit including battery module: 2.2kg (4.8lb) Battery module:
1.6kg (3.5lb) |
| Operating temperature |
0°C to 50°C [32°F to 122°F] |
| Storage temperature |
-30°C to 70°C [-22°F to 158°F] |
| Charge temperature |
Module 0°C to 35°C [32°F to 95°F] |
| Relative humidity |
20% to 85%, non-condensing |
| COMPLIANCE |
|
| Main unit |
EN 55022 Class B, FCC Part 15 Subpart B Class A + B, ICES-003
Class B, VCCI Class B, C-tick S/NZS CISPR 22 Class B, IEC/EN/UL
60950-1, CE, RoHS, REACH, WEEE |
| Battery Module |
UL, IMDG, IATA (non-restricted, OK to transport by air), CE,
RoHS, WEEE Compliant*, ADR, ECHA, DoT |
| WARRANTY |
|
| Warranty | Veracity 2-year warranty |
| Videos |
|---|
| No videos available |
| Files |
|---|
| Vercacity POINTSOURCE PLUS VAD-PSP Datasheet |
| Vercacity POINTSOURCE PLUS VAD-PSP Quick Start Guide |
| Links* |
|---|
| Veracity website |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
