.png?scale.height=500&canvas.height=500&scale.width=500&canvas.width=500&canvas.opacity=0 "TREND Networks SecuriTEST Hybrid CCTV and PoE Tester")
.png?scale.height=170&canvas.height=170&scale.width=170&canvas.width=170&canvas.opacity=0 "TREND Networks SecuriTEST Hybrid CCTV and PoE Tester")
TREND Networks SecuriTEST Hybrid CCTV and PoE Tester
TREND Networks
- Connect to various cameras
- Create PDF Reports
- Li-Ion battery or PoE+
The Trend R171000 SecuriTEST is a hybrid CCTV & PoE tester which can be connected to various different cameras with its RJ45, Wi-Fi or BNC ports (Read more)
PRODUCT DETAILS
The SecuriTEST R171000 from Trend Networks is a digital testing device that can be used with digital/IP, HD coax and analogue CCTV camera systems, and also tests the status of the PoE (Power over Ethernet). A single SecuriTEST device can supply power, configure the cameras, and document the job by creating PDF reports. This makes installation & testing jobs quicker, easier and much more cost effective.
Connecting the Camera
The SecuriTEST R171000 has 4 options when viewing and testing security cameras:
- BNC: Used to connect to all common analogue & HD-over-coax systems via a coax cable
- RJ45: Used to connect to digital/IP systems via a cat5/6 cable (with PoE+ up to 24 Watts)
- Wi-Fi: Used to connect to Wi-Fi cameras that may not be hard wired into the network
- RS485: Used to control & program Pan/Tilt/Zoom cameras & monitors
These multiple connection options completely eliminate the need for installers to take different testers with them to jobs with several different cameras on the network.
Power the Camera
Whether the job requires full camera installation, or just troubleshooting an existing set up, the SecuriTEST R171000 supports all power requirements for an IP or analogue setup.
- 12V DC: Power the camera using 12V DC from the testers Li-Ion battery - 2.5mm to 3.5mm barrel connector
- PoE+: Power PoE cameras over a single cat5/6 cable from the testers Li-Ion battery (up to 40 Watts)
- PoE+ Pass Through: Power the camera by passing PoE+ from the network and through the tester - RJ45 port
Once fully charged, the SecuriTEST R171000's lithium-Ion battery has enough power for 10 hours continuous use. Additionally, PoE+ power can be passed from the network, through the tester to a connected camera, reducing battery consumption.
Camera Setup
The SecuriTEST R171000 offers a comprehensive range of ONVIF and non-ONVIF camera setup tools to ensure the camera is installed correctly:
- Configure camera: Update camera information and network settings
- Aim and focus: Use the high-resolution touchscreen or the hard keys when wearing gloves
- Program presets for PTZ cameras: Program PTZ camera presets for
users to automatically look at
predefined areas - Take snapshot: Save video snapshots including preset locations for your installation reports
- Record video clip: Record video clips to demonstrate complete coverage for PTZ cameras
Analogue and HD cameras can also be set up quickly and easily, with options including video adjustment, PTZ protocol settings, and a test pattern generator to adjust screens.
Professional Reports
When using the ONVIF protocol, the SecuriTEST R171000 allows
installers to generate professional and detailed reports directly
from the jobsite. These can be sent directly from the tester using
email,
your preferred file sharing service or be exported on microSD
card.
Save Money
Not only do these reports provide proof of installation to the customer, they can also reduce unnecessary return trips to the site and convert unpaid call backs into billable hours.
Save Time
By creating the report during the installation or testing job, the SecuriTEST R171000 eliminates the need for security engineers to spend unpaid time after the job creating an excel spreadsheet. The SecuriTEST is the first camera tester to capture camera images, network configuration and automate documentation
Reduce Troubleshooting Time
The level of detail contained within the SecuriTEST R171000 generated report makes it a much simpler job for the installer to troubleshoot problems on future call backs.
18GB of combined storage
The SecuriTEST R171000 features 10GB of internal memory and 8GB available on the SD memory card included.
SecuriTEST R171000 Interface
|
1 |
Accurate setup
of 4k cameras |
Digital zoom displays
full detail of high resolution video on the 7”
touchscreen |
|
2 |
Fast access to
key features |
Short cut menu to
instantly launch your most used tools |
|
3 |
One hand
operation |
Pan/Tilt/Zoom (PTZ) the
camera using either the touchscreen or the hard keys. |
|
4 |
Long battery
life |
Up to 10 hours
continuous usage with a lithium-Ion battery. |
|
5 |
Ease of
use |
High resolution 7”
capacitive touchscreen with 1920 x 1200 resolution
display |
|
1 |
Flashlight |
Bright LED flashlight with 5/10/30/60
minute auto-off options |
|
2 |
PoE+
troubleshooting |
Display the PoE+ consumption of the
attached camera in real-time using the power monitor tool. Displays
voltage by pair and total wattage drawn |
|
3 |
Analogue/AHD/CVI/TVI video
input |
Connect to all common analogue and
HD-over-coax cameras for maximum versatility |
|
4 |
Troubleshooting HDMI |
Use the HDMI In port, connect to any
HDMI source to isolate Network Video Recorder (NVR) vs monitor
problems. HDMI In - Eliminates the need for a separate monitor. |
|
5 |
RS485
input/out |
Control and program Pan/Tilt/Zoom (PTZ)
cameras and monitor incoming PTZ control signals to assist in
troubleshooting analogue cameras |
|
6 |
Setup security
monitors |
Use the analogue Video Out port on the
tester with the test pattern generator function to setup security
monitors |
|
7 |
Power up camera with
PoE+ |
RJ45 network port provides PoE+ (up to
24 watts) to the camera using the internal battery when network
power is unavailable |
|
8 |
12V DC power
supply |
Power any camera using the built-in
12V/2A DC power supply |
|
1 |
Camera audio testing using
audio in port |
Test microphone equipped cameras using
the tester’s internal speaker. |
|
2 |
Camera audio testing using
audio out port |
Listen to the camera audio through the
tester using external headphones/earbuds. Useful in noisy
environments |
|
3 |
Data cable
testing |
RJ45 port to perform wiremap testing of
unshielded twisted pair (UTP) data cabling. Automatically identify cross over cables and common wiremap faults using the Tracer/Remote |
|
4 |
HDMI output |
Display tester screen on a larger
monitor using HDMI for greater clarity |
|
5 |
MicroSD
slot |
Transfer test reports, screen captures
and video clips, or update software using microSD card |
|
6 |
USB
charging |
High power 2A USB port to quickly charge
devices such as mobile phones and tablets. (Please note this port does not support data transfer) |
Features:
- CCTV Camera & PoE+ tester
- 7" LCD HD monitor (1920x1200)
- Connect to various cameras using RJ45, Wi-Fi or BNC ports
- 3 Power options including 12V DC, PoE+ from the Li-Ion battery, or PoE+ passthrough from a PoE device such as a recorder
- Faster camera login using the unique QuickIP™ function
- Comprehensive camera setup with aim, focus, PTZ, presets and network settings
- Profession PDF reports generated on site, complete with camera parameters and multiple video screen-shots
- Cable and network troubleshooting tools
- Record and playback using micro SD card
- Internal memory: 10GB
- Maximum cable length: 100m
- Battery life: Up to 10 hours
- Built in flashlight
- Camera audio testing
- One hand operation
- Fast access to key features
| Interfaces |
|
|---|---|
| Ethernet port |
Ethernet 100Base-T -
LAN/Network/Camera/RJ45 TDR test (1000Base-T) |
| RJ45 port |
PoE IN - Pass-through PoE to the
Ethernet port only no data pass through Cable test - Cable test only Not Ethernet, no network connection |
| Wi-Fi |
Built in Wi-Fi 802.11b/g/n (2.4GHz
only) up to speed 150Mb/s client to access the network for
testing |
| Coax port |
BNC (f) video IN/HD Coax IN - Analogue,
TVI, CVI, AHD input BNC (f) video out - Analogue video bar output |
| RS485 port |
RS485 male “Phoenix” type connector for
PTZ control and communications test |
| HDMI in port |
HDMI supports: 720 |
| Videos |
|---|
TREND Networks SecuriTEST Hybrid CCTV and PoE Tester| Files |
|---|
| Trend Networks SecuriTEST User Manual |
| Trend Networks SecuriTEST Quick Start Guide |
| Trend Networks SecuriTEST Datasheet |
| Links* |
|---|
| TREND Networks website |
| TREND Networks support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Can it support the new Hikvision 3K cameras?
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
.png?scale.height=1200&canvas.height=1200&scale.width=1200&canvas.width=1200&canvas.opacity=0 "TREND Networks SecuriTEST Hybrid CCTV and PoE Tester")
