Optex AX-100TFR 30m Beam Detector
Optex
- 30m Range
- Battery Powered
- Works with Pyronix
Optex AX-100TFR 30 meter wireless battery powered driveway and perimeter optical IR beam detectors sensors compatible with wireless alarms such as Pyronix (Read more)
PRODUCT DETAILS
The AX-100TFR is a 30m outdoor battery-powered active infrared (AIR) beam set, designed to protect driveways, open areas and small perimeters. Being completely battery-operated the AX-100TFR can be used in remote or hard-to-wire locations as well as for temporary applications. The dual beam set can be used with most wireless transmitters available on the market and when fitted with four of the recommended LHS20 SAFT batteries (to be purchased separately), it can operate up to 3 years. Featuring four selectable channels it can be stacked into towers.
Easy alignment
A perfect alignment between transmitter and receiver is key to
optimise the operation of the active beams. To make the optical
alignment easier, the AX-100TFR features a LED alignment
indicator.
Weather resistant
IP55 rated, the AX-100TFR housing has been designed to resist against both water and dust. The hood featured on the front cover prevents frost from attaching to the cover and potentially affecting the signal power. The beam is also fitted with specific relay and absorber to protect it from lightening surges.
Wireless flexibility
Being battery-powered the AX-100TFR doesn't require any cabling at all which makes it a very flexible solution to protect hard-to-wire areas or temporary sites such as construction or event sites. The back-box is spacious enough to accommodate most wireless transmitters available on the market.
You can easily use the Optex AX-100TFR to expand you Pyronix Enforcer wireless alarm system using the Pyronix MC2-WE Wireless sensor
Applications
The versatile Optex AX-100TFR wireless beam detector is ideal for perimeter protection, driveway alarms and to protect your home or garden. It can easily be added to your existing home alarm system and it's high performance and accuracy ensures you won't be disturbed by false alarms.
Key Features
- Long life battery
- Easy battery replacement
- Triple tamper functions
- Low battery output and LED indication
- Intermittent output function
- Compatible with numerous wireless transmitters
- Battery saving time function for wireless trasnmitters
- Selectable 4 channel beam frequencies
- 99% beam blocking stability
- A.G.C circuit
- IP55 structure
- Adjustable beam interruption time
Requires 4 x LSH20 3.6v Lithium D-Cell batteries (not included)
| Model | AX-100TFR |
|---|---|
| Range | 30m |
| Maximum arrival distance | 265m |
| Detection method | Infrared beam interruption detection |
| Beam frequency selection | 4 channel |
| Interruption period | Variable between 50, 100, 250, 500 msec (4 steps) |
| Power Source | 3.6 V 13.0 Ah: LSH20 lithium batteries manufactured by SAFT (not included) Transmitter: 2 units Receiver: 2 units |
| Current draw | 620 µA T: 300 µA + R: 320 µA (at 25°C, 3.6 VDC) |
| Battery Life | Transmitter - 5 Years / Receiver - 5 Years |
| Output - Alarm Output | Form C-Solid State Switch: 3.6 VDC, 0.01 A |
| Output - Alarm Period | 2 sec (±1) nominal |
| Output - D.Q. Output | Form A/B-Solid State Switch: 3.6 VDC, 0.01 A |
| Output - Low Battery Output | Form A/B-Solid State Switch: 3.6 VDC, 0.01 A (Transmitter & Receiver) |
| Output - Tamper output for Front cover | Form C: 3.6 VDC, 0.01 A activates when cover removed. (Receiver only) |
| Output - Tamper output for Back box | Form C: 3.6 VDC, 0.01 A activates when either back box or chassis is removed from the installment |
| Indicator - Alarm Indicator (Receiver) | (1) Light on - IR Beam not received. (2) Flickering Light - IR Beams not received sufficiently. (3) Light off - IR Beams received. |
| Indicator - Power (Transmitter) | Power ON: ON, Power OFF: OFF |
| Indicator - Low Battery | Voltage Reduction: flicker |
| Operating temperature | -20°C - +60°C (-4°F - +140°F) |
| Environmental humidity | 95% (Max.) |
| Alignment angle | ±90° Horizontal, ±5° Vertical |
| Mounting | Indoor/Outdoor, Wall/Pole/Beam Enclosure Mounting (Optional main unit mounting brackets are required, when the units mount in the beam enclosure.) |
| Weight | 1600 g (56.5 oz.) (Total weight of transmitter + receiver, excluding accessories) |
| International protection | IP55 |
| Videos |
|---|
| No videos available |
| Files |
|---|
| Optex AX100TFR Datasheet |
| Links* |
|---|
| Optex website |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
