Ajax Hub Hybrid (2G) Wired / Wireless Alarm Panel (Black)
The Ajax Hub Hybrid is a 2G alarm panel which features 2 communication channels & supports up to 100 wired or wireless devices up to 2,000 metres (Read more)
PRODUCT DETAILS
The Ajax Hub Hybrid alarm panel controls the operation of the entire alarm system and interacts with the user and the security company. it is compatible with both wired (Fibra) and wireless (Jeweller) Ajax devices and seamlessly incorporates Dahua, Hikvision, Safire, EZVIZ and Uniview IP CCTV camera systems. It allows for up to 100 wired or wireless devices in any proportion using either 4 core or cat 5 cable, in either star or ring topology, with cabling up to 2km when using cat 5 cable. The Hub Hybrid can be connected to three Internet providers at a time via Ethernet cable and 2G, SIM cards. Automatic switching between channels takes seconds.
The Hub Hybrid has a built-in antenna for wireless devices and does not need an expander, making it fully compatible with all Ajax Jeweller wireless devices straight out of the box.
Topology
Star Topology
Fibra communication technology allows you to wire independent lines up to 2 km long. Eight lines in one system run by Hub Hybrid minimize potential damage. Even a completely broken line leaves the security system at 87% operational. And with wireless sensors, this percentage will be even higher.
With Fibra, you get the flexibility to build a star topology or use 8 lines as zones in an iconic burglar alarm. Up to 100 hardwired devices in any configuration, allows you get an intelligent security system built to your exact requirements.
Ring Topology
For a 100% secure wired system, the Hub Hybrid also supports ring connection topology.
Up to four ring circuits can be added to each system and in the line breakage event, the ring splits into two working segments, the devices continue to operate, and the system notifies a security company and users about the incident. Upcoming OS Malevich updates will provide the ring topology support.
Jeweller Wireless Technology
In addition to wired devices, the Hub Hybrid also allow for up to 100 wireless devices to be added to the system, which is ideal for remote area where wiring would be difficult, or as an additional security measure against scenarios where the alarm wire has been sabotaged.
Jeweller radio protocol provides two-way communication between the hub and wireless devices at a distance of up to 2,000 meters, allowing remote system control and alarm transmission in 0.15 seconds.
Jeweller applies time frames to synchronize devices communication, authentication to prevent forgery, and encryption to protect the data. An energy-efficient protocol provides wireless devices with up to 7 years of battery life.
Up to 5 range extenders with a communication range of up to 1,800 meters can be connected to Hub Hybrid by radio or cable via Ethernet.
Seven Layers of Security
The Hub Hybrid features 7 countermeasures against tampering, forgery and jamming:
- Demounting and case opening detection: The hub board features two tampers that detect opening and demounting attempts.
- Protection against device forgery: To authenticate devices, unique tokens and properties are used. The hub checks them for each communication session. If any parameter fails the check, the hub ignores the device commands. The procedure excludes the possibility of system control by a third-party device: key fob, smart button, or keypad.
- Hub communication loss detection: Ajax Cloud server polls the hub at intervals of 10 seconds or more. In case of mobile frequencies jamming and disconnection of the wired internet, the server can inform a monitoring station about the complete isolation of the object in just 1 minute.
- Data protection: All the data stored and transmitted are protected by block encryption with a dynamic key. Radio communication uses frequency hopping, which makes interception and jamming more difficult.
- Jamming detection: The hub analyzes the quality of communication with system devices. If some of the data packages are lost, the hub will change the transmission frequencies and inform the monitoring station of interference detection.
- Event transmission and delivery: The monitoring station is notified about alarms and system events in 0.15 seconds. Due to the addressability of devices, the message includes the time, device model, devicename, event type, and room.
- Protection of the line against break: Hub Hybrid features 8 lines and supports ring connection topology - up to four rings in a hybrid security system. In the event of a line breakage, the ring splits into two working segments, devices continue to operate, and the system notifies a security company and users about the incident.
Automated Security
Hub Hybrid allows creating up to 32 scenarios and minimizing the impact of human factor impact on security. The hub can arm and disarm a facility or part of it by schedule. Instantly activate a smoke machine if someone enters the premises. Blackout the premises and turn on emergency lighting in case of fire. Or shut off water in case of a leak. Control lights, electric locks, roller shutters, and garage doors - by arming/disarming, button press, or a detector alarm.
Features:
- Up to 100 wired/wireless devices in any configuration (max 5 range extenders and 5 10 sirens)
- Seamless integration with the Dahua, Hikvision, Safire, EZVIZ, Uniview IP cameras and DVRs
- Up to 50 users
- Up to 32 automation scenarios
- Advanced anti-sabotage measures
- Remote configuration via the Ajax apps
- Compatible with both 4-core alarm cable and U/UTP cat 5 twisted pair
- Star or ring topologies
- Up to 2km cable length when using cat 5
- Up to 2km wireless distance
- Ethernet and 2G SIM communication
- Alarm photo verification in 9 seconds
- Up to 3.5 days battery backup
- Dedicated apps for installer and end user
Capacity |
|
Ajax devices |
up to 100
|
Cameras or DVRs |
up to 25
|
Users |
up to 50
|
Automation scenarios |
up to 32
|
Security groups |
up to 9 |
Rooms |
up to 50 |
Wired
communication |
|
Fibra communication technology |
Proprietary wired communication technology.
Fibra combines the reliability of wires with the freedom of radio
connection. It features:
|
Compatible wire |
4-core cable Bus connection. |
Input |
8 bus lines Compatible with Fibra devices only. |
Bus line length |
up to 2,000 m When using the U/UTP cat.5 twisted pair. |
Topologies |
|
Devices polling interval |
from 12 to 300 s Adjusted by PRO or user with admin rights in the Ajax app. |
Wireless
communication |
|
Jeweller communication technology |
Proprietary wireless communication technology to transmit
alarms and events. It features:
|
Frequency bands |
866.0 - 866.5 MHz 868.0 - 868.6 MHz 868.7 - 869.2 MHz 905.0 - 926.5 MHz 915.85 - 926.5 MHz 921.0 - 922.0 MHz |
Maximum effective radiated power (ERP) |
up to 20 mW Featured automatic power control to reduce power consumption and noise interference. |
Radio signal modulation |
GFSK |
Radio signal range |
up to 2,000 m Between the hub and connected devices (in an open space). Maximum range depends on the connected device. |
Polling interval |
from 12 to 300 s Adjusted by PRO or user with admin rights in the Ajax app. |
Encrypted communication |
All the data stored and transmitted are protected by block
encryption with a dynamic key. |
Wings communication technology |
Proprietary wireless communication technology to transmit photo
verifications. It features:
|
Frequency bands |
866.0 - 866.5 MHz 868.0 - 868.6 MHz 868.7 - 869.2 MHz 905.0 - 926.5 MHz 915.85 - 926.5 MHz 921.0 - 922.0 MHz |
Radio signal range |
up to 1,700 m Between the hub and connected devices (in an open space). Maximum range depends on the connected device. |
Radio frequency hopping |
Radio communication uses frequency hopping to prevent
interception and jamming. |
Recommendations |
|
Power supply | 110-240 V~ power supply. For indoor use only. |
Communication
channels |
|
Ethernet |
1 x 8P8C socket |
Cellular |
2 x micro–SIM slot |
Cellular bands |
2G |
Automatic switching between communication channels |
Switching between SIMs — up to 4 minutes. Switching between Ethernet and SIM — instantly. |
Communication channels prioritization |
1. Ethernet 2. Cellular connection |
Alarm Transmission System Categories |
SP2, SP5, DP3 |
Control panel operation method |
Pass-through |
Signalling security |
S2 |
Information security |
I2 |
Notifications |
|
Supported notification types |
Push SMS Calls |
Event types |
Alarms Malfunctions Events Security mode changing |
Photo
verification |
|
Photo verification types |
Photo by alarm Photo by scenario Photo on demand Photo by schedule |
Photo delivery time |
up to 9 s |
Photo resolution |
up to 640 x 480 pixels |
Number of photos in a series |
from 1 to 5 pictures |
Monitoring |
|
Supported protocols |
SurGard (Contact ID) SIA (DC-09) Other proprietary protocols |
Event types |
System alarms and events Photo verifications Panic button coordinates |
Power supply |
|
Main power supply type |
Type A |
Device operating AC voltage range |
110–240 V~, 50/60 Hz |
Device operating DC voltage range |
10.5–15 V⎓ |
Autonomous operation |
up to 60 hours |
Low battery voltage |
11.7 V⎓ |
Low battery recovery voltage |
12.6 V⎓ |
End of life battery voltage |
10.5 V⎓ |
Maximum output peak-to-peak ripple battery voltage |
220 mV⎓ |
Minimum backup battery energy level in the charged
state |
100 % |
Current
consumption |
|
Maximum rated output |
0.6 A |
Maximum at nominal voltage |
105 mA |
Quiescent at nominal voltage |
95 mA |
Average |
up to 90 mA - up to 50 mA - When Ethernet is disabled. |
Casing |
|
Dimensions |
192 x 238 x 100 mm |
Weight |
852 g |
Operating temperature range |
from −10°C to +40°C |
Operating humidity |
up to 75% |
Protection class |
IP30 |
Colours |
Black and white |
Complete set |
Hub Hybrid (2G) Power cable Screw terminal block Adapter (only for INCERT compliance) Battery connection cable Ethernet cable Casing Installation kit Eight 120 Ω termination resistors Quick start guide |
AJA0124 | Hub Hybrid (2G) (WHITE) | In stock | |
AJA0125 | Hub Hybrid (2G) (BLACK) | In stock |
Videos |
---|
Files |
---|
Ajax Hub Hybrid User Manual |
Links* |
---|
Ajax website |
Ajax support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.