Ajax Hub Hybrid (4G) Wired / Wireless Alarm Panel
Ajax
- Up to 100 Devices
- 2G/3G/4G(LTE)
- Photo Verification
The Ajax Hub Hybrid is a hybrid control panel designed for use with Ajax security system, and can connect up to 100 wired and wireless Ajax devices. (Read more)
PRODUCT DETAILS
The Ajax Hub Hybrid is a hybrid control panel designed for use with Ajax security system. You can connect up to 100 wired and wireless Ajax devices to protect against intrusion, fire, and flooding, and also allow you to control electrical appliances according to scenarios or manually — in a mobile app or by pressing the Button.
To monitor the operation of all security system devices, the hub communicates with the connected devices using three encrypted protocols:
1. Jeweller is a radio protocol for transmitting events and alarms from Ajax wireless devices. The communication range is up to 2,000 m without obstacles: walls, doors, or inter-floor constructions.
2. Wings is a radio protocol for transmitting photos from MotionCam and MotionCam Outdoor detectors. The communication range is up to 1,700 m without obstacles: walls, doors, or inter-floor constructions.
3. Fibra is a wired protocol for transmitting events and alarms from Ajax wired devices. The communication range is up to 2,000 m when connected via twisted pair U/UTP cat.5.
If a detector is triggered, the system raises an alarm in less than a second, regardless of the communication protocol. In case of an alarm, the hub activates the sirens, starts the scenarios, and notifies the security company’s monitoring station and all users.
Topology
Star Topology
Fibra communication technology allows you to wire independent lines up to 2 km long. Eight lines in one system run by Hub Hybrid minimize potential damage. Even a completely broken line leaves the security system at 87% operational. And with wireless sensors, this percentage will be even higher.
With Fibra, you get the flexibility to build a star topology or use 8 lines as zones in an iconic burglar alarm. Up to 100 hardwired devices in any configuration, allows you get an intelligent security system built to your exact requirements.
Ring Topology
For a 100% secure wired system, the Hub Hybrid also supports ring connection topology.
Up to four ring circuits can be added to each system and in the line breakage event, the ring splits into two working segments, the devices continue to operate, and the system notifies a security company and users about the incident. Upcoming OS Malevich updates will provide the ring topology support.
Jeweller Wireless Technology
In addition to wired devices, the Hub Hybrid also allow for up to 100 wireless devices to be added to the system, which is ideal for remote area where wiring would be difficult, or as an additional security measure against scenarios where the alarm wire has been sabotaged.
Jeweller radio protocol provides two-way communication between the hub and wireless devices at a distance of up to 2,000 meters, allowing remote system control and alarm transmission in 0.15 seconds.
Jeweller applies time frames to synchronize devices communication, authentication to prevent forgery, and encryption to protect the data. An energy-efficient protocol provides wireless devices with up to 7 years of battery life.
Up to 5 range extenders with a communication range of up to 1,800 meters can be connected to Hub Hybrid by radio or cable via Ethernet.
Anti-sabotage protection
Hub Hybrid has 3 communication channels for connecting to the Ajax Cloud server: Ethernet and two SIM cards. This allows you to connect the device to three different communication providers at the same time. If one of the communication channels is unavailable, the hub will automatically switch to another one and inform the control panel of the security company and system users.
When a jamming attempt is detected, the system switches to an idle radio frequency and sends notifications to the control panel of the security company and to system users.
The hub regularly checks the quality of communication with all connected devices. If any device loses connection with the control panel, upon expiry of the time specified by the administrator, all system users (depending on the settings), as well as the monitoring station of the security company, will receive a notification about the incident.
No one can turn off the hub unnoticed, even when the facility is disarmed. If an intruder tries to open the hub casing, the tamper button will trigger immediately. The alarm notification will be sent to the security company and to system users.
The hub rechecks Ajax Cloud connection at regular intervals. The ping period is specified in the hub settings. If a minimum ping period is set, the server may notify the users and the security company in as little as 60 seconds after the connection is lost.
Features:
- 8 Fibra lines to connect wired devices
- Up to 100 devices in the system
- 3 communication channels: Ethernet and two SIM cards
- Wired & wireless communication technology with a range of up to 2,000 m
- Wireless communication technology to transmit the photos at a distance of up to 1700 m
- More than two days of running on a backup battery
- Configuring via a smartphone or desktop app
- Line scanning function
- Device identification via LED indication or by alarm
| Capacity |
|
| Ajax devices |
Up to 100
|
| Cameras or DVRs |
Up to 25
|
| Users |
Up to 50
|
| Automation scenarios |
Up to 32
|
| Security groups |
Up to 9 |
| Rooms |
Up to 50 |
| Wired
communication |
|
| Fibra communication
technology |
Proprietary wired communication
technology. Fibra combines the reliability of wires with the
freedom of radio connection. It features:
|
| Compatible wire |
4–core cable Bus connection |
| Input |
8 bus line Compatible with Fibra devices only |
| Bus line length |
up to 2,000 m When using the U/UTP cat.5 twisted pair |
| Power supply of devices |
up to 14.4 W For all connected wired devices |
| Topologies |
|
| Devices polling interval |
from 12 to 300 s Adjusted by PRO or user with admin rights in the Ajax app |
| Wireless
communication |
|
| Jeweller communication
technology |
Proprietary wireless communication
technology to transmit alarms and events. It features:
|
| Frequency bands |
866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz |
| Maximum effective radiated power
(ERP) |
up to 20 mW Featured automatic power control to reduce power consumption and noise interference |
| Radio signal modulation |
GFSK |
| Radio signal range |
up to 2,000 m Between the hub and connected devices (in an open space). Maximum range depends on the connected device |
| Polling interval |
from 12 to 300 s Adjusted by PRO or user with admin rights in the Ajax app |
| Encrypted communication |
All the data stored and transmitted are
protected by block encryption with a dynamic key. |
| Wings communication
technology |
Proprietary wireless communication
technology to transmit photo verifications. It features:
|
| Frequency bands |
866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz |
| Radio signal range |
up to 1,700 m Between the hub and connected devices (in an open space). Maximum range depends on the connected device. |
| Radio frequency hopping |
Radio communication uses frequency
hopping to prevent interception and jamming |
| Recommendations |
110–240 V~ power supply For indoor use only |
| Communication
channels |
|
| Ethernet |
1 x 8P8C socket Up to 100 Mbps |
| Cellular |
2 x mini–SIM slot |
| Cellular bands |
2G (GSM900/DCS1800 (B3/B8)) 3G (WCDMA 850/900/2100 (B1/B5/B8)) 4G/LTE (FDD B1/B3/B5/B7/B8/B20) |
| Automatic switching between
communication channels |
Switching between SIMs — up to 4
minutes. Switching between 4G, 3G, and 2G networks of one SIM — instantly. Switching between Ethernet and SIM — instantly |
| Communication channels
prioritization |
1. Ethernet 2. Cellular connection Communication channels work in parallel to increase system reliability. Most of the data is transmitted via Ethernet. |
| Notifications |
|
| Supported notification types |
|
| Event types |
|
| Monitoring |
|
| Supported protocols |
|
| Event types |
|
| Power supply |
|
| Power supply |
110–240 V~, 50/60 Hz Up to 10 W of mains power consumption |
| Backup |
12 V⎓ battery (not included) Space in the body and rails for installing batteries with a capacity of 4 Ah and 7 Ah. |
| Autonomous operation |
up to 60 hours Hub Hybrid with a 7 Ah backup battery can power a system of 30 wired devices for 60 hours. Wireless devices operate on batteries and do not require additional power supply. |
| Casing |
|
| Dimensions |
192 x 238 x 100 mm |
| Weight |
852 g |
| Operating temperature range |
from −10°C to +40°C |
| Operating humidity |
Up to 75% |
| Body protection class |
IP50 |
| Colours |
Black or White |
| Complete set |
|
| Complete set |
Hub Hybrid (4G) Power cable Battery connection cable Ethernet cable Casing Installation kit Eight 120 Ω termination resistors Quick start guide |
| 17721 | Hub Hybrid (4G) White | In stock | |
| 17720 | Hub Hybrid (4G) Black | In stock |
| Videos |
|---|
Fibra technology: how to install a wired security system in 6 hours| Files |
|---|
| Ajax Hub Hybrid (4G) Datasheet |
| Ajax Hub Hybrid (4G) User Manual |
| Links* |
|---|
| Ajax website |
| Ajax support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
