Ajax Hub Hybrid (4G) Wired / Wireless Alarm Panel (White)

The Ajax Hub Hybrid is a hybrid control panel designed for use with Ajax security system. You can connect up to 100 wired and wireless Ajax devices to protect against intrusion, fire, and flooding, and also allow you to control electrical appliances according to scenarios or manually — in a mobile app or by pressing the Button.

To monitor the operation of all security system devices, the hub communicates with the connected devices using three encrypted protocols:

 1. Jeweller is a radio protocol for transmitting events and alarms from Ajax wireless devices. The communication range is up to 2,000 m without obstacles: walls, doors, or inter-floor constructions.

 2. Wings is a radio protocol for transmitting photos from MotionCam and MotionCam Outdoor detectors. The communication range is up to 1,700 m without obstacles: walls, doors, or inter-floor constructions.

 3. Fibra is a wired protocol for transmitting events and alarms from Ajax wired devices. The communication range is up to 2,000 m when connected via twisted pair U/UTP cat.5.

If a detector is triggered, the system raises an alarm in less than a second, regardless of the communication protocol. In case of an alarm, the hub activates the sirens, starts the scenarios, and notifies the security company’s monitoring station and all users.

Topology

Jeweller Wireless Technology

In addition to wired devices, the Hub Hybrid also allow for up to 100 wireless devices to be added to the system, which is ideal for remote area where wiring would be difficult, or as an additional security measure against scenarios where the alarm wire has been sabotaged. 

Jeweller radio protocol provides two-way communication between the hub and wireless devices at a distance of up to 2,000 meters, allowing remote system control and alarm transmission in 0.15 seconds.

Jeweller applies time frames to synchronize devices communication, authentication to prevent forgery, and encryption to protect the data. An energy-efficient protocol provides wireless devices with up to 7 years of battery life.

Up to 5 range extenders with a communication range of up to 1,800 meters can be connected to Hub Hybrid by radio or cable via Ethernet.

Anti-sabotage protection

Hub Hybrid has 3 communication channels for connecting to the Ajax Cloud server: Ethernet and two SIM cards. This allows you to connect the device to three different communication providers at the same time. If one of the communication channels is unavailable, the hub will automatically switch to another one and inform the control panel of the security company and system users.

When a jamming attempt is detected, the system switches to an idle radio frequency and sends notifications to the control panel of the security company and to system users.

The hub regularly checks the quality of communication with all connected devices. If any device loses connection with the control panel, upon expiry of the time specified by the administrator, all system users (depending on the settings), as well as the monitoring station of the security company, will receive a notification about the incident.

No one can turn off the hub unnoticed, even when the facility is disarmed. If an intruder tries to open the hub casing, the tamper button will trigger immediately. The alarm notification will be sent to the security company and to system users.

The hub rechecks Ajax Cloud connection at regular intervals. The ping period is specified in the hub settings. If a minimum ping period is set, the server may notify the users and the security company in as little as 60 seconds after the connection is lost.

Features:

• 8 Fibra lines to connect wired devices
• Up to 100 devices in the system
• 3 communication channels: Ethernet and two SIM cards
• Wired & wireless communication technology with a range of up to 2,000 m
• Wireless communication technology to transmit the photos at a distance of up to 1700 m
• More than two days of running on a backup battery
• Configuring via a smartphone or desktop app
• Line scanning function
• Device identification via LED indication or by alarm