Ajax MotionCam Outdoor Wireless PIR Detector with Built-In Camera
The Ajax MotionCam Outdoor is a pet imune PIR detector with built-in camera which is designed to be used with the Ajax Jeweller wireless alarm system (Read more)
PRODUCT DETAILS
The Ajax MotionCam Outdoor is a PIR detector that is designed to be used with the Ajax Jeweller wireless alarm system and provides a second layer of security with a high-quality built-in camera. Upon detection, the MotionCam Outdoor will send an animated series of photos for you to assess the situation before the alarm is sounded.
Combining the best optics, fast processor and advanced software algorithms, the MotionCam Outdoor takes informative pictures in any weather and features a built in IR sensor to provide clear night-time images. In addition, it also comes equipped with 2 independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. When both sensors detect motion, LISA performs correlation and spectral analysis of the signals, which helps to instantly distinguish real threats from interferences.
Interface
Number | Description | Number |
Description |
---|---|---|---|
1 | Hood for protecting camera and
anti-masking sensors from rain and snow |
7 | Perforated part of the mounting panel.
Necessary for tamper triggering in case of any attempt to detach
the detectors from the surface. Do not break it off |
2 | Camera |
8 | The hole for attaching the SmartBracket
mounting panel with a screw |
3 | LED indicator |
9 | Power button |
4 | Motion detector lens |
10 | Tamper button. Triggers when an attempt
is made to detach the detector from the surface or remove the
mounting panel |
5 | IR backlight for night photos and low
light conditions |
11 | Detector’s QR code / identifier. Used
to connect MotionCam Outdoor to the Ajax security system |
6 | SmartBracket mounting panel. To remove
the panel, slide it down |
12 | Scrollbar for adjusting the detection
range |
Features:
- Combined camera & PIR detector
- Sun/Rain Hood Included
- Combines images into a GIF and send them to a mobile device
- Built in IR sensor
- Grade II
- Intelligent false alarm filter
- Multilevel anti-sabotage protection
- Anti-masking system
- Notifications about detachment
- Configurable detector ping interval
- IP55 enclosure protection
- Two-way communication at a distance of up to 1,700 meters
- Photo delivery in less than 9 seconds
- Up to 3 years of battery life
Specifications | |
Classification |
Electro-optical radio channel security
detector |
Type of detector |
Wireless |
Installation method |
Outdoors / indoors |
Recommended installation height |
0.8 - 1.3 m |
Compatibility |
Hub 2, Hub 2 Plus Not compatible with ReX radio signal range extender |
Sensing element |
2 x PIR sensor |
Motion detection distance |
Adjustable, from 3 to 15 m |
Pet immunity |
Animals up to 80 cm tall |
Sensitivity |
Adjustable, 3 levels |
Motion detector’s viewing angle |
Horizontal — 90° Vertical — 80° |
Camera’s angle |
Horizontal — 105° Vertical — 50° |
TV distortion (EBU standard) |
Barrel, –17% |
Photo in case of alarm |
Photo resolution: 320 x 176 pixels (by default) 640 x 352 pixels Shooting series up to 5 photos |
Infrared light for shooting in the dark |
Available |
Power supply |
4 x CR123A batteries |
Supply voltage |
6 V |
Battery life |
Up to 3 years (up to 2.5 years if “Delay when entering” setting
is activated) |
Jeweller radio technology |
Communication range with a hub — up to 1,700 m in an open
space Two-way communication between hub and device Radio frequency bands: 866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz (depends on the region of sale) Self-adjusting RF output power — up to 20 mW Block encryption with a dynamic key Detector polling period — 12–300 s Frequency hopping |
Alarm delivery time |
0.15 s |
Wings radio technology |
Transmission of a series of photos Photo delivery time with a default settings: up to 9 seconds |
Temperature sensor |
Available |
Operating temperature range |
From –25°С to +60°С |
Operating humidity |
Up to 95% |
Protection class |
IP56 |
Anti-sabotage |
Anti-masking Protection against forgery Jamming detection Tamper-resistant |
Remote configuration and testing |
Available |
CMS compatibility |
CMS connectivity: Contact ID, SIA (DC-09) |
Dimensions |
206 x 108 x 93 mm |
Weight |
470 g |
Warranty |
24 months from the date of sale |
Complete set |
MotionCam Outdoor motion detector SmartBracket mounting panel Hood visor 4 x CR123A batteries (pre-installed) Installation kit User’s guide |
Videos |
---|
Files |
---|
MotionCam Outdoor User Manual |
Links* |
---|
Ajax website |
Ajax support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.