Pyronix Enforcer V11 Wireless Intruder Alarm Kit 3 (ENF/KIT3-UK)

Name: Pyronix Enforcer V11 Wireless Intruder Alarm Kit 3 (ENF/KIT3-UK)
Brand: Pyronix
SKU: 10759
Price: 240.25 GBP
Availability: InStock
Rating: 5 (6 reviews)

Question 1

Is the control panel battery or mains?

(Michael Hill 02/07/2024)

(Nathan 02/07/2024)

Answer

The control panel is powered from the mains and has a built-in battery backup that is kept charged when the power is on.

Question 2

How do I check the siren batteries and how often do they need changing?

(Steve Palastanga 19/05/2024)

(Nathan 28/05/2024)

Answer

The panel and App will notify you when the batteries are low but I would aim to replace the batteries at least every two years.

Question 3

Can this bell box be wired as well as wireless? I am moving into a house and don’t know if I will be able to cable to this just yet. Does this bell box offer both options?

(Jake 23/08/2023)

(Neil Levett 24/08/2023)

Answer

The bell box module is wireless. You can run a power cable to it but you won't be able to wire it directly to the panel. The alarm panel does have a port which allows you to hardwire 1 device to it, so if you needed it to be wired, you could buy one of the wired bellbox modules to replace the wireless one.

Question 4

Does this system work with iPhones?

(Mr Shelton 15/07/2023)

(Callum 18/07/2023)

Answer

The Pyronix app is available on iOS and Android, so this will work on both platforms.

Question 5

Does your system conform with EN50131 - grade 2.

(John Reidy 17/03/2023)

(Paul Jarvis 20/03/2023)

Answer

Yes, this system meets the Grade 2 standards.

Question 6

How do you fix the PIR on the wall?

(Andreas Andrea 25/02/2023)

(Nathan 28/02/2023)

Answer

You can fix directly through the back of the PIR either straight onto a flat wall or through the angled faces for corner mounting. See the guide below for more information.
https://cdn.connectec.uk/uploads/datasheets/kx10dpinstallationguide.pdf

Question 7

Does system comply with security alarm EN 50131 standard

(John Reidy 24/02/2023)

(Paul Jarvis 24/02/2023)

Answer

Yes, this alarm complies with the below standards and is Grade 2
EN 62368-1:2014 + A11:2017 | EN 50131-1: 2006 + A1: 2009 +A2:2017 | EN 50131-3: 2009 | EN 50131-6: 2017 | EN 50131-5-3: 2017 | EN 50130-5: 2011 | EN 50130-4: 2011 + A1: 2014 | PD 6662: 2017

Question 8

In a previous question you were asked if the Enforcer V11 was compatible with the EUR-23 UK Premium Quality Tag and the reply was that the EUR-23 UK was a wired reader and would need wiring to the RS485 port. The features described on the Enforcer V11 control panel indicate that it has a Tag reader included, is this correct or would a separate tag reader be required to use this facility.

In the system I am configuring I would like a wired bell unit (preferably Deltabell X) this module appears to have its own unique bell box, why is it different to the other wired units the E and plus and could the standard bell box be used.

I would also prefer to have one wired dual tech sensor in my configuration as the area to be protected is external to the main building and separated by a solid wall, could this be connected directly to the enforcer control panel or would I need to include additional wired inputs.

(Anthony Lawton 18/10/2022)

(Nathan 20/10/2022)

Answer

1. Yes, the Enforcer has a built-in proximity tag reader
2. The included Deltabell WE module is wireless module. The E, plus and X are all hard-wired modules. The hard-wired modules can be connected to the Enforcer if required.
3. There are 2 wired zones on the Enforcer panels for connecting wired devices like PIR's.

Question 9

How many sensor can attach to this alarm
Because I need 7 sensors

(Gill 02/10/2022)

(Paul Jarvis 03/10/2022)

Answer

This panel accepts 32 wireless devices out of the box which can be a combination of detectors, keyfobs, keypads and bell boxes. This can be increased with the addition of expanders.

Question 10

Is this alarm NUD / NACOSS / SSAIB insurance approved?

(alistair haywood 11/09/2022)

(Nathan 20/09/2022)

Answer

The Pyronix Enforcer meets grade 2 specifications and is approved by all major certification bodies when installed by an approved installer

Question 11

Is possible to hard wire the bell and panel so not to have to run off the mains and then off of the batteries in the event of power failure?

(J Richmond 27/08/2022)

(Nathan 29/08/2022)

Answer

The bell module included in the kit 3 is battery only. If you purchase the kit 2 without the bell module however, you can add the Deltbell E, plus or X module separately, all of which can be hard wired and have a built-in battery backup. The Enforcer panel does have a dedicated wired bell output for this purpose.

Question 12

Does v11 have chime for entry zone

(Bobby 25/07/2022)

(Paul Jarvis 27/07/2022)

Answer

Yes the V11 Enforcer supports an audible chime on an entry zone.

Question 13

Are there any allowances made for pets on these alarms? Specifically, a 4kg very adventurous cat.

(Sam Jones 18/05/2022)

(Nathan 03/06/2022)

Answer

The Pyronix PIRs with a "P" in the model number (e.g., KX10DP) feature pet immunity to ignore small to medium sized dogs and cats. This is achieved by masking the lower part of the room so animals that climb onto furniture or can be seen walking upstairs may still be picked up by the detectors.

Question 14

What is the delay time on the enforcer when arming the system through the panel keypad? Can this be altered at all?

(Andrew Lynch 22/03/2022)

(Paul Jarvis 24/03/2022)

Answer

Yes the exit and entry delay times for the different set modes can be altered for when you are arming/disarming via the keypad. You can also have different arm/disarm times for arming via the mobile app.

Question 15

Can more than one bell box be connected to the system (wired or wireless).
What is the signal range from the panel to devices (PIR & Bell box)?

(Brian McGowan 28/02/2022)

(Paul Jarvis 01/03/2022)

Answer

A total of two wireless bells and two wired bells can be connected to the Enforcer system. Signal range to devices is approximately 300m in open space.

Question 16

Does this bell box light up at night?

(Andrew Lynch 27/02/2022)

(Rob Walley 28/02/2022)

Answer

The wireless bell box does not light up at night, however a wired bell box, the deltabell x (10821) mod with light box (10818) does light up

Question 17

Does the Pyronix app used to monitor alarm connect to any HIK DVR ?

(Greg Wahl 03/10/2021)

(Paul Jarvis 23/12/2021)

Answer

Yes the Pro-Control app can be used to monitor Hikvision equipment but the Home Control 2.0 supports only Pyronix alarms.

Question 18

Do I need an independent internet connection to run this system/sensors? Or does it generate its own wifi signalling? If it generates its own wifi signal is this secure for hacking?

Cheers
Nev

(Neville Bamforth 27/11/2021)

(Callum 29/11/2021)

Answer

Hi Neville,

The wireless system is a proprietary network that the alarm system generates for all of the associated addons. This is a secure network that switches frequency regularly and/or in the event of any kind of attempted jamming, which makes it secure and reliable.

Kind regards

Question 19

What type of battery do you need as replacement for external sounder

(Thomas Anderson 29/11/2021)

(Callum 29/11/2021)

Answer

Good morning Thomas,

The required battery is the Pyronix BATT-ES1 which can be found here: https://connectec.uk/security/intruder-alarms/wireless-alarm-systems/pyronix-enforcer/pyronix-enforcer-batteries-and-spares/pyronix-batt-es1-single-deltabell-keypad-3-volt-lithium-battery

Kind regards

Question 20

Hi I use these can you interface with other makes of DVR/NVR recorders please

(Alan Blackwell(AB ALARMS) 16/11/2021)

(Paul Jarvis 16/11/2021)

Answer

This alarm does not support connectivity to other recorders but can be operated form the Hikvision CCTV mobile apps and well as the Pyronix apps

Question 21

Does this alarm meet EN50131 level 2?

(john moore 15/11/2021)

(Paul Jarvis 16/11/2021)

Answer

The Enforcer panel meets the following standards
EN50131-1:2006+A1:2009
EN50131-3:2009
EN50131-6:2008
EN50131-5-3:2005+A1:2008
PD6662:2010
SG 2
EC II

Question 22

Does wireless external sounder can also be wired?

(Sp 22/10/2021)

(Nathan 01/11/2021)

Answer

Yes, you can add a wired external sounder to a Pyronix Enforcer panel.

Question 23

Hi - why have you removed the manuals from the resources section? (Programming, communications etc.) They were really useful!

(Bob 28/09/2021)

(Nathan 04/10/2021)

Answer

Pyronix raised security concerns with making these publicly available. They are now emailed automatically after a purchase or you can email support@connectec.uk and we will send you any documentation you need.

Question 24

Hi can I add any wired components, keypad or siren as I have a wired connection to this already

(Richard 25/07/2021)

(Nat 02/09/2021)

Answer

There are 2 wired zones, an RS485 connection and a wired bell box output on the panel. You can also use the ZEM 8 expander to add another 8 wired zones.

Question 25

Does this alarm so with the new V11 firmware now?

(Chris 08/08/2021)

(Paul Jarvis 25/08/2021)

Answer

Yes all of our stock in the Kit3's are V11 versions now

Question 26

Does this alarm system include an internal and external alarm?

Is the the external alarm for outside the house the wireless bell box module with battery?

Is there an internal alarm for inside the house? If so, does the alarm noise come from the enforcer wireless alarm panel?

(Will 30/06/2021)

(Nathan 01/07/2021)

Answer

The wireless bell box module is the external alarm (you will need a lid and base).
The panel also has a built-in sounder for an internal alarm.

Question 27

How many phone numbers can you link to the system for notification of alarm being set off?

(Joe Fairhall 25/05/2021)

(Paul Jarvis 26/05/2021)

Answer

We are not aware of a limit to the number of shared devices for one panel. You can add the panel to several mobiles with the app installed.

Question 28

Does the system need phone line ,internet( Wi-Fi) or sim card

(Rohit Ga 14/03/2021)

(Paul 24/05/2021)

Answer

The Pyronix Enforcer can connect to WiFi if required for cloud/App connection although this is not required for standard offline usage.

Question 29

Will this kit use my WiFi or does it require a cable from router?
Thanks

(Norman 03/07/2020)

(Nat 24/05/2021)

Answer

This Pyronix Enforcer panel has on board WiFi and will connect to your router wirelessly.

Question 30

Hi. Is this kit easy to install? Does it come with installation guidance?
Thank you

(Atoosa 02/07/2020)

(Nathan 24/05/2021)

Answer

This is a professional product designed to be installed by an alarm installer. If you have not installed anything similar I would recommend contacting an alarm installer.

Question 31

Are the batteries included for the bell box module

(Roland Bedford 26/06/2020)

(Nathan 24/05/2021)

Answer

Yes, the kit includes all the required batteries

Question 32

Is the backup battery kept charged by the mains connection?

(Tom 11/06/2020)

(Nat 24/05/2021)

Answer

Yes, the mains supply continually charges the main panel backup battery.

Question 33

Hi my kitchen alarm is low can u tell me what battery I need for the detector please thanks

(John lowe 03/08/2020)

(Paul 24/05/2021)

Answer

The Pyronix wireless PIR detectors take a 3 volt lithium CR123(A) battery.

Question 34

What is the wireless range for this please.
I want to put a PIR sensor in the garage at the side of the house.

(Paul Goddard 13/05/2021)

(Paul Jarvis 13/05/2021)

Answer

There is no specific range as such as wireless signals are significantly impacted by walls and objects blocking line of sight. If the panel is located centrally in the property, you should achieve good coverage on a typical 4-5 bedroom house. Please consider factors like wall construction and thickness.

Question 35

Can the control panel be used on battery ONLY ?

(Clare 07/03/2021)

(Paul Jarvis 08/03/2021)

Answer

The panel requires mains power to operate without any faults. The battery is designed to offer a backup in instances of power loss.

Question 36

Hi, Will the ENF/KIT3-UK Alarm kit work with the MC1/SHOCK-WE, MCNANO-WE and EUR-023 UK Premium Quality Proximity tag.

(Eric 26/01/2021)

(Paul Jarvis 05/02/2021)

Answer

Yes this panel will work with these accessories but the EUR-023 is a wired tag reader and will need to be hard wired to the RS485 on the panel.

Question 37

Hi does the control panel come with a back up battery thanks

(Kevin 21/12/2020)

(Nathan Owen 13/01/2021)

Answer

Yes, the control panel comes with a backup battery that is constantly charged by the mains supply.

Question 38

Can the Enforcer control panel be plugged into the mains without any wiring

(Steve 30/04/2020)

(Nathan 02/05/2020)

Answer

The panels has 230V mains terminals inside. You can either connect some flex with a plug or wire it directly into a fused spur.

Question 39

Can DIY fit this

(stephen king 31/01/2020)

(Paul Jarvis 03/02/2020)

Answer

Although these panels have a very intuitive interface, if you have no prior experience of installing an alarm system, particularly a Pyronix one, you may find this difficult. We would always advise that you seek the services of a professional installer to ensure that the alarm is correctly installed.

Question 40

Will this work with a 4G router providing WiFi?

(Julian Guy 25/11/2019)

(Nat 26/11/2019)

Answer

Yes, the Pyronix cloud service uses peer to peer technology which means it will work over almost any Internet connection, including 4G, without needing router configuration.

Question 41

Is the Bell Box module included in this kit the 2-way model? For anti jamming

(Kevin 13/06/2019)

(Nat 13/06/2019)

Answer

Yes, all of the current Enforcer wireless devices are twin channel when used with a new V10 panel.

Question 42

Is there a back light on the bell box?

(Matt 11/06/2019)

(Nat 11/06/2019)

Answer

The wireless bell box module (DELTAMOD-WE) in the Enforcer kits has flashing comfort LED's but doesn't have a back-light.

Question 43

Does this kit come with keyfobs?

(Shay 18/05/2019)

(Paul 18/05/2019)

Answer

No, the KIT3 doesn't include keyfobs.

Question 44

Can you use the DIGI-GSM module as well as the wifi module so if phone line stops working it will then work with mobile network.

(Karl 29/01/2019)

(Paul Jarvis 29/01/2019)

Answer

The Enforcer only supports one module. You could however use an external dialer as a backup

Question 45

You mentioned "optional subscription for the Pyronix Cloud for the app functionality". Does it mean without this subscription I can't control the system via app?

(Anna 06/01/2019)

(Paul Jarvis 06/01/2019)

Answer

Correct. The Enforcer will work fine as a standalone alarm but the mobile app will require subscription to the cloud service which is free of charge for the first year and approx £36 per year thereafter.

Question 46

Are there any contracts or other ongoing charges

(mike 07/11/2018)

(Paul Jarvis 07/11/2018)

Answer

There are no compulsory subscription charges but there is an optional subscription for the Pyronix Cloud for the app functionality . The first year is free and subsequent years can be paid for through the online portal.

Question 47

Are the batteries included for the sensors etc

(M Bird 08/10/2018)

(Nathan 08/10/2018)

Answer

Yes the kit includes all the batteries required for the sensors and the backup battery for the panel.

Question 48

Is the bell box included with this kit?

(Stephen 08/10/2018)

(Paul 08/10/2018)

Answer

The kit includes the module for the bell box. You will need a base or lid which are available in a choice of colours.

Question 49

Does the enforcer control panel need a 240 volt supply?

(Brenda Dunn 08/10/2018)

(Nat 08/10/2018)

Answer

Yes the control panel requires a permanent 240 volt supply. It has a backup battery which is included.

V11 Panel
Onboard/maximum zones	32/66
Onboard/maximum outputs	3/38
Areas (independent or level)	4
Arm/disarm methods	App, pin, prox or keyfob
User codes	80
- Guard/duress	2
System logs	750
Programmable automation types	30
Wireless devices (requires ZEM32-WE*)
Onboard/maximum* zones	32/64
Keyfobs	32
Arming stations	4
Bells	2
Wired devices
Onboard/maximum zones	2/34
Onboard/maximum outputs	3/38
Maximum keypads	4 (including onboard)
Maximum readers	4 (including onboard)
Communication
Module compatibility	WIFI Built Onboard, DIGI-LAN, DIGI-GPRS+SIM, DIGI-GPRS, DIGI-PSTN
App compatibility**	Yes
Push notifications**	Yes
Signalling protocols**	Contact ID IP, Contact ID, SIA IP, SIA3, Fast Format IP, Fast Format and SMS
Technical specification
Power supply onboard	~15.0VDC
- Maximum rating	0.7A
Panel current consumption	222mA - 75mA
Battery capacity	2200mAh
Other details
Operating temperature	-10ºC to +40ºC
Dimensions (W x H x D)	220 x 160 x 50mm
Weight	1025g inc. battery
Certifications	Security Grade 2 Environmental Class II

Pyronix Enforcer V11 Wireless Intruder Alarm Kit 3 (ENF/KIT3-UK)

PRODUCT DETAILS

Why buy from Connectec?

Product Code	10759
Model	ENF/KIT3-UK