PRODUCTS FROM BLAKE UK

The Blake 8-Way Indoor Distribution Amplifier is designed to remove or reduce 5G/4G LTE interference and amplify TV frequencies within the 21-48 band

The Blake 4-Way Indoor Distribution Amplifier is designed to remove or reduce 5G/4G LTE interference and amplify TV frequencies within the 21-48 band

The Blake 4-way Masthead Amplifier is designed to reduce or remove 5G/4G LTE interference & amplify TV frequencies within the 21-48 band (470-694MHz)

The Blake Masthead Amplifier is designed to reduce or remove 5G/4G LTE interference and amplify TV frequencies within the 21-48 band (470-694MHz).

The Blake 5G antenna enables you to receive and transmit mobile phone signal in areas where this may be difficult, such as rural areas or basements.

The high-quality, low-cost, lightweight 80cm Satellite dish is ideal for use with satellite Freesat boxes and TVs with built-in satellite receivers

The Blake 20 Element Log Periodic Aerial can be mounted for horizontal or vertical Polarisation & overcomes issues with 5G & 4G without using filters.

The Blake 28 Element Log Periodic Aerial can be mounted for horizontal or vertical Polarisation & overcomes issues with 5G & 4G without using filters.

The Blake SMA female to SMA male coax cable catch leads are available in 3m, 5m, 10m & are suitable for use in hand-held radio & 4G mobile antennas

The Blake SMA female to SMA RP male coax cable catch leads are available in 3m, 5m, 10m & are suitable for use in hand-held radio & 4G mobile antennas

The Blake PROception mains powered range of UHF/VHF Distribution Amplifiers lets you remotely watch and control Sky and Freesat in up to 8 rooms

The Blake stack strap offers safer installation for chimney mounted brackets & can be installed without having to leave the safety of the roof ladder

The Blake twist on F type coax plug is the standard connector for satellite LNB's and set top boxes. F type connectors are also used for TV and CCTV.

The Blake crimp on F plug is a coax crimp connector for RG6 & WF100 equivalent coax cable that is commonly used in TV, Satellite and CCTV installation

Our Tungsten Carbide Drill Bits are available in a variety of sizes & are ideal for quick drilling into hard surfaces thanks to the 4 flute helix

Our Blow Out covers are available in black, white or brown & are an ideal way to cover cable holes in walls & prevent damp problems around cable entry

The Single Sided Cable Dispenser from Blake has non-slip feet and is suitable for both WF100 and WF125 type cable reels with a minimum 1" centre hole

Our range of wall mounted steel IP66 enclosures offer a solution to virtually every application & can be easily customised to suit most requirements

The wall mounted range of steel IP66 enclosures offer a solution to virtually every application & can be easily customised to suit most requirements

The Blake galvanised aerial mast clamp bracket can be used to securely clamp & hold in place an alloy or steel aerial mast up to 2 inches in diameter

The Blake galvanised aerial mast clamp bracket can be used to securely clamp & hold in place an alloy or steel aerial masts up to 2" & 1" in diameter

The Blake galvanised aerial mast clamp bracket can be used to securely clamp & hold in place an alloy or steel aerial mast up to 1 inch in diameter

The Blake tile-and-slate clamp is a non-invasive fastening system with no drilling or lashing required and is perfect for installing home CCTV cameras

The Blake tile-and-slate clamp is a temporary or permanent system with no drilling or lashing required & is perfect for installing home CCTV cameras