Haydon 24V AC/AC 1A Unterminated Power Supply

⭐⭐⭐⭐⭐ 0 reviews | 7 Questions

High reliability
24 volt AC output
1 year guarantee

A range of Haydon 24 volt AC power supplies transformers with a total cable length of 3.8 metres available with 1 or 2 Amp ratings. (Read more)

There are 2 variants of this product

£14.04
£11.70 Ex VAT

10+ In stock

Order before 15:30 for delivery from Tuesday 26th November

Product Code	10655
Model	HAY-24VPSUINLINE1A

Secure transaction

More Information

RELATED PRODUCTS

PRODUCT DETAILS

The Haydon range of 24 volt AC to Ac inline power supplies are a reliable power source for your electronic equipment. These power supplies are ideal for use with PTZ cameras, smart doorbells and other small electronic devices.

It is important to ensure that the device you are intending to power matches the voltage of the power supply and that it does not exceed the maximum current rating.

Look for the following symbols on your device before using this power supply

YOU MIGHT ALSO NEED

SPECIFICATIONS

Specification
Output Current	1000ma (1A)	2000ma (2A)
Output Power Max	24VA	48VA
Dimensions (mm)	89.5 x 68 x 58.5	105 x 92.5 x 65
Output Voltage	24V AC
Output connector	Unterminated bare wire
Output Polarity	+ve centre
Input Voltage	240V AC
Input Connector	UK 3 Pin
Output Load Efficiency	70% Min
Operating Temp	-10°C - 40°C
Cable Length	3.8m
Approvals	EMC EN55014-1/2 EN61000-3-2/-3-3 BS EN61558-1/-2-6

VARIANTS

10655	24V AC/AC 1A	£14.04	In stock
10837	24V AC/AC 2A	£19.50	In stock

USEFUL FILES AND LINKS

Videos
No videos available

Files
Datasheet

Links*
Haydon website
Haydon support site

* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.

QUESTIONS AND ANSWERS

Get expert answers to questions specific to this product below or for more help visit our Q&A forum

Hi, I need a 24-volt AC transformer to replace a missing one from an old 1980s slot car set (Scalextric). I know it's a 24 Volt set but how do I know which Amp one to buy please? Thank you.

(Joey 25/01/2024)

The Scalextric will only draw as much power as it needs so you can fit a power supply with a higher current safely. If it's under powered it may not work or could damage the PSU potentially. If the Scalextric has a sticker on that shows the wattage you can calculate the required current from this, otherwise you could fit a larger power supply like a 4 Amp that should be more than enough power.

(Nathan 26/01/2024)

Will this 24 v 4 amp transformer drive a water fountain pump rated at 24 v 32 w for long periods ? I used your 2 amp version and it only lasted a week used 6hr during the day

thanks Chris

(Christopher Stuttle 31/05/2023)

Assuming the requirement is for a 24v AC transformer, 32 watts equates to less than 1.5 amps. 2 Amps should have been sufficient but it may have been a little too close to its constant capability. A higher current transformer should provide greater tolerance and should be reliable. I would also ensure that the transformer is not getting too hot if it is mounted within a sealed enclosure.

(Paul Jarvis 01/06/2023)

Does the transformer have an earth and ground wire on the 3-pin plug?
Want to use adapter to power a motorised steering wheel but don’t want any risk of shock if anything goes wrong with the circuit,

(Ross 21/10/2022)

The Haydon AC/AC 24V PSU's are double-insulated and do not have the earth pin connected in the 3-pin plug.

(Nathan 28/10/2022)

Is this transformer suitable for activating a solenoid valve used in a garden irrigation system (transformer itself will be in a dry shed).
Valve solenoid is specified at 24VAC (50-60Hz) with an inrush current of 0.30 A at 60Hz and a holding current of 0.19A. Activation will be for about 30 mins per day.
If so, should I add a fuse on the secondary side (as well as the fuse in the transformer mains plug). If such a fuse is needed, can you recommend what type and rating it should be? Many thanks.

(RICHARD GREATHEAD 18/08/2022)

Yes, the transformer will be suitable for this. If the device itself has no internal fuse, secondary use would be advisable. You can use an inline car fuse holder and suitably rated fuse for this.

(Nathan 29/08/2022)

How long is the 24v lead (ie the cord on the load side of the transformer) please?

(Bryan Zoutendijk 05/07/2022)

The load side cable is 1.6 metres

(Paul Jarvis 08/07/2022)

If i use this to power garden lighting and a short occurs in the lighting circuit,how do i protect the transformer ?

(B . Kay 06/10/2021)

We would recommend that you install a fuse in order to protect your equipment against short circuit.

(Paul Jarvis 07/10/2021)

Can this transformer be used outside. To power A 24 volt pond pump.

(Graham Darby 21/12/2020)

This transformer is not IP rated and would need to be housed in a suitable waterproof enclosure for outdoor use

(Nathan 13/01/2021)

REVIEWS

Read customer reviews or submit your review of this product

Thanks for taking the time to review this product.
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.

There are no reviews for this product.

Why buy from Connectec?

SUPPORT

Our technical support team are experienced installation engineers with years of field experience.

SERVICE

Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.

DELIVERY

We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.

PARTNERS

We are approved resellers for direct access to manufacturer warranty and support.

* Qualifying products only, subject to terms. For more information view our delivery information.