Spelsberg GEOS-S Tough Industrial Outdoor Cabinet Enclosure 300x400x226mm IK09

The new sealing principle "Drain Protect"

The special design of the GEOS enclosures provide durable protection from penetrating moisture.

Moisture from sources such as rain or snow is discharged by the widely overlapping cover and the drainage channel along the bottom side of the enclosure to the rear side. Additionally, an elastomer seal provides for optimum protection from environmental influences.

With this, the enclosures of the GEOS series which have been optimised for the use in the most varied environments are suitable for highly demanding outdoor applications.

Operating resources even better protected

The enclosure doors of the new GEOS-S cabinets from Spelsberg are available in grey, black or transparent design. The transparent design allows for displays to be read, while control and signalling devices remain protected without affecting the technical properties. Otherwise usual mechanical reworking, e.g. for the installation of a viewing window, is thus completely unnecessary. Thanks to their large opening angle of more than 180°, the doors ensure unrestricted work on the open enclosure and good operability at the same time.

• Locking system - cam lock or pivoted lever
• Fastening options outside the sealing area
• Doors available in transparent, grey and black
• No restriction on the installation of internals
• Doors allow easy opening with a large opening angle of >180°
• Door hinges can be moved 180° without drilling

New accessories

From built-in modules protected against contact to cabinet door step

The cabinets of the GEOS-S series can be retrofitted with the range of accessories from Spelsberg. For example, mounting plates in various sizes, standard rails and support frames are available for installing control or signaling devices. If the enclosure is to be subdivided, the partition walls are suitable for this purpose. 

• Built-in modules protected against contact: can be mounted without tools and are safe against manipulation
• Frame + door as a coherent assembly
• Cabinet door step prevents unintentional slamming of the door with two fixed positions
• Door contact switch is integrated in the frame and can be used for remote enquiries
• LED interior lighting is integrated into the frame to illuminate the installation space 
• Quick-change system for mounting rail frame and mounting plate 
• Different installation heights possible for different sizes of switchgear and built-in devices

And the GEOS-S can do so much more!

The cabinets are just as flexible and safe as the empty enclosures. They are prepared for the innovative ventilation element BEL Air. This transports any condensate that occurs out of the enclosure in the shortest possible time by means of air exchange. Thereby an IP protection of IP65 is preserved. The doors are lockable for increased security and prevent unauthorised opening. The cam lock mechanism does not require any additional earthing or sealing of active parts.

• Cam lock as a cost-effective locking system with various locking inserts
• Pivot lever for more comfort and safety with an optional built-in lock
• Transparent doors for a clear view of installed devices
• Mounting domes in the door for flexible installation of mounting plates and more
• Suitable for horizontal and vertical mounting
• Door/frame combination can be easily removed for easier and faster installation of mountings