Ruijie RG-EST100-E 2.4GHz 300Mbps Dual-Stream 500m Wireless P2P Bridge
The Ruijie RG-EST100-E is a pair of point-to-point bridges that can transmit data wirelessly up to 500m on the 2.4GHz band with speeds up to 300Mbps. (Read more)
PRODUCT DETAILS
The Ruijie RG-EST100-E is a point-to-point bridge that can transmit data wirelessly up to 500m on the 2.4GHz band, making it ideal for devices that are spread over a large area where cabling is not practical, such as CCTV installations. The RG-EST100-E supports two spatial streams (2x2 MIMO technology) and provides up to 300Mbps throughput, which can fully meet the data link bandwidth requirements of various services.
The Ruijie RG-EST100-E is supplied as a pre-configured pair ready for plug-and-play installation.
The RG-EST100-E consists of 2 devices, including the recorder-end and camera-end device. They are paired by default and can be deployed without requiring any configurations. It can be managed via the app, including viewing the network topology and modifying configurations, which has completely revolutionized the conventional contact-type bridge configuration method. Bridge maintenance no longer requires working at heights, reducing the difficulty of maintaining bridges to an unprecedented level.
Features:
- RG-EST100-E can easily transmit data from 500m away in real time
- Factory-free configuration, without complex alignment
- IP55 Weatherproof, -30℃~60℃ guarantee stable operating at outdoor or elevator environment
- Support maximum 10 * 3MP cameras loading at 100m, 5 * 3MP cameras loading at 500m
- Visually Intuitive statistics monitoring on Ruijie cloud, easy maintenance at remotely
Basic |
|
Radio Design |
2 GHz Single-Band Dual-Stream |
Transmission Protocol |
IEEE 802.11b/g/n |
Operating Band |
802.11b/g/n: 2.400~2.483GHz |
Antenna |
Directional antennas, 8 dBi |
Polarization |
Horizontal: 70°, Vertical: 70° |
Bridging Distance |
500m (recommended) |
Spatial Streams |
2x2, MU-MIMO |
Memory/Flash |
64 MB/8 MB |
Maximum Throughput |
Up to 300 Mbps at 2.4 GHz |
Ports |
2 10/100Base-T Ethernet ports, port 1 with Passive
PoE |
Max. Transmit Power |
≤100 mW(20 dBm) (adjustable) |
IP Rating |
IP55 |
Lightning Protection |
±6 KV(Common Mode) |
Installation |
Wall-mounted/ Pole-mounted |
Weight |
0.3 kg |
Dimensions (D x W x H) |
165.5mmx68.7mmx42mm |
Software Features (Layer
2) |
|
Ethernet |
LAN Port Working in Bridging Mode |
VLAN |
802.1Q VLAN |
Software Features (Layer
3) |
|
IPv4 |
ARP Ping Traceroute |
UCAST |
Default Route |
Internet |
|
DHCP Client |
Yes |
Static IP Address |
Yes |
WAN Address Collision Avoidance |
Changing LAN Address Automatically upon WAN Address
Collision |
Device Access |
10.44.77.254 192.168.120.1 10.44.77.254 |
Routing |
|
Default Route |
Yes |
Management
Features |
|
SN Management |
Entering SN Importing SN by Excel File |
Wizard |
Project Settings: Project Name, Password and Type |
MQLink |
MQLink |
Networking Management |
Adding Device to Network Based on LNID Set Up New Device (LNID=0) One-to-Many Removing the device from project when the device is reset to factory settings. Restoring LNID to 0 and password to admin when the device is removed from project. Network Migration Device Deletion Discovering neighbouring devices automatically and reporting the device whose LNID is 0 or inconsistent with the network LNID. Migrating the device automatically after users enter the password. |
Basic Settings |
AP/CPE Switchover LAN Settings Hostname Settings Password Settings Country/Region Code Settings Time Zone Settings Clock Settings |
Network Settings |
Password Settings IP Address Settings SSID Settings |
Configuration Synchronization |
Synchronizing configuration when the device is added. After users edit settings on Eweb, MACC will receive the timestamp reported by the device and trigger synchronization. A device goes online after settings are changed. The device will be synchronized with configuration based on its timestamp. Synchronizing configuration among Ruijie Cloud, Eweb and MACC |
Alarm |
|
Alarm |
Default Configuration Notification IP Conflict Networkwide Management SSID Notification WDS Link Exception Alarm Disconnection Alarm |
Diagnostics |
|
Diagnostics |
Network Tools Fault Collection |
System Tools |
|
Upgrade |
Upgrade to Specified Version Upgrade All Devices Local Upgrade |
Maintenance |
System Time Reboot Reset to Factory Settings Web Session Timeout |
Deployment Tool |
Deployment Tool |
Device List |
|
Device List |
Hostname, Type, Client Count, Channel, Online/Offline
Status |
Device Details |
|
Device Details |
Hostname, SN, MAC Address, Management IP Address, Type,
Firmware Version |
Remote SSH |
Yes |
Remote Web |
Yes |
WDS |
One-click optimization Switching among multiple working modes (high-bandwidth/normal/anti-interference) WDS: SSID Hiding, Not Open AP/CPE Switchover SSID, Channel and Power Settings Bridging Status LED LED off: No bridging One LED blinking: < -78dBm One LED on: -78dBm< RSSI <-72dBm Two LEDs on: -72dBm< RSSI <-65dBm Three LEDs on: RSSI > -65dBm Root AP RSSI: The lowest RSSI shall prevail. Link Quality: High, Medium and Low If the CPE end detects bridging failure and fails to connect again in 5 minutes, it will be rebooted automatically to set up bridging again. Unlocked: Default SSID (Broadcast, Open), @ruijie-bXXXX Locked: Default SSID (Hidden, Open), @ruijie-bXXXX The locked device supports re-pairing on Eweb and can be locked again. AP/CPE supports fetching AP SSID/BSSID list by scanning. Display Recommended Camera Count Multi-VLAN Transparent Transmission |
Security
Features |
|
Basic Features |
Login Authentication (password, none) |
Password Security |
Static Password with Encrypted Transmission and
Storage |
Developer Mode |
Developer Mode |
Application Protocol
Features |
|
DNS |
DNS client |
SSH |
SSH TFTP Client DHCP-Server DHCP Client CLIENT |
WLAN Basic
Features |
|
Local Forwarding |
Local Forwarding Local Association |
WLAN RF Features |
|
802.11 Protocol |
Country Code Channel Expansion |
WLAN Encryption and Security |
Link Authentication Access Authentication Security (WPA-PSK/WPA2-PSK/WPA-WPA2-PSK) Key Agreement Protocol |
Bridging Security |
Bridging key for the entire network Bridging key for a pair of wireless bridges Bridging key for a wireless bridges |
WLAN QOS |
|
WLAN QoS/WMM |
WMM |
Storm Control |
|
Multicast/Broadcast Conversion to Unicast |
Multicast/Broadcast Conversion to Unicast
(Four-Address) |
Multicast/Broadcast Rate Increase |
Three-Address Broadcast/Multicast Packet Rate: 11
Mbps |
Multicast/Broadcast Packet Suppression |
Limiting the Rate of DHCP and ARP Broadcast Packets Limiting the Rate of SSDP and mDNS Multicast Packets Limiting the Rate of All Types of Broadcast Packets Limiting the Rate of All Types of Multicast Packets |
Monitoring |
|
WDS Link Quality |
Displaying WDS Link Quality |
Real Topology |
Displaying Real Topology |
Networking |
|
Self-Organizing Network |
Establishing a Self-Organizing Network Between
Bridges |
Hardware
Features |
|
LED indicator |
LEDs indicate the bridging quality: LED off: No bridging LED blinking: ≤-78dBm One LED on: -78dBm< RSSI ≤-72dBm Two LEDs on: -72dBm< RSSI ≤-65dBm Three LEDs on: >-65dBm |
Hardware Button |
1 reset button |
Power Supply |
12 VDC power supply or 12 VDC Passive PoE |
Power Consumption |
< 5W |
Environment |
Operating temperature: -30°C to 60°C (-22°F ~ 140°F) Storage temperature: -40°C to 70°C (-40°F ~ 158°F) Operating humidity: 5% to 95% (noncondensing) Storage humidity: 5% to 95% (noncondensing) |
MTBF |
> 400,000H |
RSSI |
|
RSSI |
–58 dBm/100 meters –68 dBm/500 meters |
Camera Number |
|
3M |
14/100 meters 5/500 meters |
4-5M |
6/100 meters 3/500 meters |
6-7M |
3/100 meters 1/500 meters |
Package Contents |
|
Device |
RG-EST100-E x 2 |
Cable tie |
2 |
Power supply |
Power adapter x 2 |
User Manual |
1 |
Package Weight |
852g |
Package Dimension (w x d x h) |
220 mm 2 202 mm 2 87 mm |
Videos |
---|
Files |
---|
Ruijie RG-EST100-E Datasheet |
Ruijie RG-EST100-E User Manual |
Links* |
---|
Ruijie website |
Ruijie support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
* Qualifying products only, subject to terms. For more information view our delivery information.