Ajax MultiTransmitter Black Third Party Integration Module
Ajax
- 18 Wired Zones
- Ip to 2000m Range
- 2 year guarantee
The Ajax MultiTransmitter Jeweller is an 18 zone integration module for connecting third-party wired detectors and devices to an Ajax security system (Read more)
PRODUCT DETAILS
The Ajax MultiTransmitter Jeweller is an integration module for connecting third-party wired detectors and devices to an Ajax security system. It has 18 wired zones for connecting NC, NO, EOL, 2EOL and 3EOL devices. The MultiTransmitter works as a part of an Ajax security system and communicates with the hub via secure Jeweller radio protocol. The communication range with the hub is up to 2,000 meters in an open space.
With MultiTransmitter, you can specify the device name, the type of alarm and a room for each wired device. This makes notifications more informative - you know not just what happened but where. This information is displayed using push notification, SMS, and is also sent to the security company's monitoring station using an appropriate code. A total of 9 types of alarms are available: intrusion, fire alarm, medical help, panic button, gas alarm, leakage, tamper alarm, malfunction, custom (service event).
Available in black or white
Interface
| Number |
Description |
|---|---|
| 1 |
Screws fixing the casing lid. Use a hex
key (Ø 4 mm) from the installation kit to unscrew it |
| 2 |
The place for installing the 12 V⎓
backup battery with a capacity of up to 7 A∙h |
| 3 |
MultiTransmitter QR code and ID /
serial number |
| 4 |
Perforated part of the casing.
Necessary for tamper triggering in case of any attempt to detach the device from the surface. Do not break it off |
| 5 |
Perforated parts of the casing for
cable output |
| 6 |
Fasteners for securing
cables |
Features:
- Module for connecting wired alarm to Ajax and managing security via the app
- Connection to a hub at a distance of up to 2,000 meters
- Grade II
- Alarms delivered in 0.15 seconds
- Adjustable ping from 12 seconds
- Instant connection loss detection with wired device (EOL)
- Free space in the body for a backup battery 7 Ah
- 2 tampers that detect dismounting and opening of the body
- Less hassle with automated security
- Security via smartphone app
- Available in black or white
| Compatibility |
|
| All Ajax hubs |
The Hub control panel does not support
the 2EOL and 3EOL connection types. Other hub models require the OS Malevich firmware version 2.13 or higher to support such connection types. |
| Range extenders |
All Ajax radio signal range extenders |
| Communication |
|
| Jeweller communication
technology |
Proprietary wireless communication
technology to transmit alarms and events. Key features: Two-way communication. Advanced sabotage protection. Block encryption featuring a dynamic key. Instant notifications. Remote control and configuration in Ajax apps. |
| Frequency bands |
866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz |
| Maximum effective radiated power
(ERP) |
up to 20 mW |
| Radio signal modulation |
GFSK |
| Radio signal range |
up to 2,000 m |
| Encrypted communication |
All the data stored and transmitted are
protected by block encryption with a dynamic key. |
| Frequency hopping |
To prevent radio interference and
jamming. |
| Wired devices
connection |
|
| Number of zones |
18 wired zones Multiple devices can be connected to one zone. The number of connected devices depends on their power consumption |
| Type of connection |
NC, NO, EOL MultiTransmitter with a firmware version lower than 2.13. NC, NO, EOL, 2EOL, 3EOL MultiTransmitter with a firmware version 2.13 and higher. The Hub control panel does not support the 2EOL and 3EOL connection types. Other hub models require the OS Malevich firmware version 2.13 or higher to support such connection types. |
| EOL resistance |
from 1 kΩ to 7.5 kΩ with 100 Ω
increment MultiTransmitter with a firmware version lower than 2.13. EOL resistance is measured automatically in the Ajax PRO apps. from 1 kΩ to 15 kΩ for each resistor, up to 30 kΩ of total resistance MultiTransmitter with a firmware version 2.13 and higher. Resistance is measured automatically for each EOL resistor in the Ajax PRO apps. |
| Cable length |
up to 400 m |
| Operation mode |
pulse, bistable |
| Event types |
15 event types of wired devices Tamper alarm Intrusion Fire Auxiliary alarm Panic button Gas alarm Malfunction Leakage Glass break High temperature Low temperature Masking Duress code (opening) Vibration (seismic sensor) Custom |
| Recommendations |
The device is powered from the 100–240
V~ mains and designed for indoor use only. |
| Sabotage
protection |
|
| Tamper alarm |
Two tampers to detect the
MultiTransmitter casing opening and alert about detachment from the
wall. |
| Protection against spoofing |
with the integration module
authentication |
| Communication loss detection |
within 36 seconds |
| Instant detection of wired connection
loss, short circuits, and malfunctions |
when using EOL/2EOL/3EOL connection
type |
| Power supply |
|
| MultiTransmitter power
supply |
100–240 V~, 50/60 Hz |
| Type |
type A |
| Device’s operating voltage
range |
100–240 V~, 50/60 Hz |
| Quiescent device’s current consumption
at nominal voltage |
14.6 mA |
| Maximum device’s current consumption at
nominal voltage |
69.6 mA |
| MultiTransmitter backup power
supply |
12 V⎓, up to 7 Ah capacity with a full
charge cycle of up to 30 hours MultiTransmitter average consumption from the backup battery after the main power supply loss is up to 33 mA (without detectors). When using a 7 Ah battery, the minimum operating time at a maximum load of 1 А will be 7 hours. For autonomous work for 12 or 24 hours, the maximum load should be no more than 0.55 A and 0.28 A, respectively. The backup battery is not included in the set. |
| Low battery voltage |
11.4 V⎓ |
| Low battery recovery voltage |
12.6 V⎓ |
| End-of-life battery voltage |
11.1 V⎓ |
| Maximum output peak-to-peak ripple
battery voltage |
50 mV⎓ |
| Minimum backup battery energy level in
the charged state |
100% |
| Connected devices power
supply |
10.5–15 V⎓, up to 1 A of total maximum
current consumption |
| Casing |
|
| Dimensions |
192 x 238 x 100 mm |
| Weight |
805 g |
| Operating temperature range |
from −10 °C to +40 °C |
| Operating humidity |
up to 75% |
| Protection class |
IP40 |
| Colours |
Black and white |
| Complete set |
MultiTransmitter board Casing Power cable Screw terminal block Adapter (only for INCERT compliance) 12 V⎓ battery connection cable Installation kit Quick start guide |
| AJA0122 | MultiTransmitter v2 (WHITE) | In stock | |
| AJA0123 | MultiTransmitter v2 (BLACK) | In stock |
| Videos |
|---|
MultiTransmitter: module for connecting wired alarm to Ajax and managing security via the app
Ajax Security System: When security is art
Ajax: The Next Generation Wireless Security System| Files |
|---|
| No files available |
| Links* |
|---|
| Ajax website |
| Ajax support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
