Ajax Wireless Wall-mounted Button for Manual Fire Alarm Activation - Green
Ajax
- LED Indication
- Key Reset Operation
- 2 year guarantee
The Ajax ManualCallPoint Jeweller is a fast and straightforward fire alarm call point with LED indicators, key reset, tamper alarm and 7 year battery (Read more)
PRODUCT DETAILS
The Ajax ManualCallPoint Jeweller is a fast and straightforward way for anyone to activate the fire alarm. Pressing the button triggers the built-in sirens of all fire detectors in the system and informs the users. Meanwhile, the central monitoring station (CMS) receives the alarm and calls emergency services. All the data is instantly available in Ajax apps: which device was triggered, when, and where. In a life-endangering situation, Ajax innovative features follow an alarm in seconds: automation scenarios de-energize the facility, turn the emergency lights, and unlock the exits.
ManualCallPoint is a part of the Ajax ecosystem, transforming the button into a genuine IoT device. Each element of the ecosystem is constantly supervised. The button exchanges data with a hub via Jeweller radio protocol. The hub has two-way communication with Ajax Cloud which provides real-time information to Ajax apps.
The device does not require periodic testing by triggering to ensure it operates properly — the Ajax system supervises its state every minute. If a button has an issue, you will receive a notification specifying the problematic button on the premises.
Features:
- Up to 7 years of battery life
- Simplified button mechanism to reduce the risk of failure
- Transparent front lid to prevent accidental alarm activation
- LED indication of the alarm state
- Tamper alarm
- Automation scenarios activation
- Visual verification of alarm by MotionCam detectors or any NVR camera
- Indoor/outdoor intrusion sirens activation
- Alarm delivery to CMS
| Compatibility |
|
| Control panels |
Hub Plus Jeweller Hub 2 (2G) Jeweller Hub 2 (4G) Jeweller Hub 2 Plus Jeweller Hub Hybrid (2G) Hub Hybrid (4G) Differences between hubs |
| Range extenders |
ReX Jeweller ReX 2 Jeweller |
| Communication |
|
| Jeweller communication technology |
Proprietary wireless communication
technology to transmit commands, alarms, and events. Key features:
|
| Frequency bands |
866.0–866.5 MHz 868.0–868.6 MHz 868.7–869.2 MHz 905.0–926.5 MHz 915.85–926.5 MHz 921.0–922.0 MHz |
| Maximum effective radiated power (ERP) |
up to 25 mW Automatic power control to reduce power consumption and noise interference. |
| Radio signal modulation |
GFSK |
| Radio signal range |
up to 1,700 m Between button and hub (or range extender) in an open space. |
| Encrypted communication |
All stored and transmitted data are
protected by block encryption featuring a dynamic key. |
| Frequency hopping |
Radio communication uses frequency hopping to prevent
interception and jamming. |
| Key features |
|
| Resettable frangible element |
activates the button When the central part (frangible element) is pressed, the button depresses inward, triggering an alarm or initiating a scenario. Two yellow stripes appear at the top and bottom, indicating the device's state. |
| Operating modes |
fire alarm scenario trigger With appropriate settings, it activates an alarm or controls Ajax automation devices. |
| LED status indication |
fire alarm malfunctions The LED indicator on the device enclosure lights up when a fire alarm is triggered or malfunctions are detected. |
| Interconnected fire detectors alarms |
by pressing the button By pressing the frangible element, fire detectors in the system trigger the built-in sirens. |
| Critical alerts |
The system can activate intrusion sirens and send audible alarm
notifications to users, even if the sound is muted, the Do Not
Disturb mode is on, or headphones are connected. |
| Protection against accidental presses |
Lift the transparent lid to access the frangible element. The
lid protects against false button presses. |
| Alarm transmission to CMS |
can be disabled |
| Special tool
(key) |
|
| Button reset |
after pressing To reset the button, insert the special tool into the corresponding hole |
| Hole in the enclosure |
to hang on a ring from a keychain The person responsible for fire safety can carry the special tool on their keychain. |
| Convenient dismantling |
The special tool opens the lock to dismantle the device from
SmartBracket mounting panel. |
| Recommendations |
It is recommended to install the button in easily accessible
places at a height of 1.4 m. The device is designed for indoor installation only. |
| Sabotage
protection |
|
| Tamper alarm |
Notifies on attempts to detach the button from the surface or
remove it from the mounting panel. |
| Protection against spoofing |
device authentication |
| Communication loss detection |
after 36 s The detection time depends on the Jeweller or Jeweller/Fibra settings. |
| Power supply |
|
| Batteries |
2 × CR123A Pre-installed. With typical use (one press lasting 1 minute per week), the batteries can last up to 7 years. |
| Enclosure |
|
| Dimensions |
102 × 104 × 39 mm |
| Weight |
214 g |
| Operating temperature range |
from 0 °C to +50 °C |
| Operating humidity |
up to 80% |
| Complete set |
|
| Complete set |
ManualCallPoint (Red) Jeweller SmartBracket mounting panel Special tool (key) 2 × CR123A battery (pre-installed) Installation kit Quick start guide |
| 19153 | AJAX MANUAL CALL POINT (GREEN) | In stock | |
| 19152 | AJAX MANUAL CALL POINT (BLUE) | In stock | |
| 19151 | AJAX MANUAL CALL POINT (RED) | In stock |
| Videos |
|---|
| No videos available |
| Files |
|---|
| Ajax ManualCallPoint Datasheet |
| Ajax ManualCallPoint User Manual |
| Links* |
|---|
| Ajax website |
| Ajax support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
