IP-COM W36AP AC1200 Dual Band Gigabit In-Wall Access Point
IP-COM
- PoE Powered
- 2.4 GHz & 5 GHz
- Up to 1167 Mbps
The IP-COM W36AP AC1200 is a high-performance, PoE powered wireless access point which supports dual-band concurrent wireless speed of up to 1167 Mbps (Read more)
PRODUCT DETAILS
The IP-COM W36AP AC1200 is a high-performance, dual-band wireless access point designed for small businesses, hotel rooms, villas or any application where you need easy access to a Wi-Fi signal. It is Compliant with IEEE 802.11ac protocol and Wave 2 standard and features MU-MIMO technology. PoE (Power over Ethernet) only requires one cable to transmit both data and power, eliminating the need for a separate power cable, which makes the installation quick and easy.
The W36AP AC1200 supports dual-band concurrent wireless speed of up to 1167 Mbps, and the standard 86 mm x 86 mm in-wall design enables the AP to be installed in any in-wall electrical boxes of 86 mm x 86 mm and 75 mm x 75 mm, whilst blending in with the decor.
Features:
- Standard 86 mm x 86 mm design for easy installation
- Complaint with IEEE 802.11ac and WAVE2.0
- Built-in omni-directional antennas
- 2.4 GHz and 5 GHz concurrency for a higher capacity
- Spectrum navigation (5 GHz priority), an escort for network performance
- Precise RF signal optimization, a guarantee of 2-room Wi-Fi coverage without dead zone
- Standard PoE power supply, an assurance of easy AP upgrade and installation
- Supporting unified configuration and management
| Product Information | |
|---|---|
| Product Model | W36AP |
| Product Appearance | In-wall access point |
| Product Dimension | 86 x 86 x 32 mm |
| Application Scenarios | Wi-Fi coverage for large-sized apartments/villas/hotel rooms |
| Hardware
Specifications |
|
| Working Frequency Band | 2.400 - 2.4835 GHz, 5.15 0 - 5.250 GHz |
| Wireless Protocol Standard | IEEE 802.11a/b/g/n/ac |
| 2.4 GHz Access Rate | 1-300Mbps |
| 5 GHz Access Rate | 6-867Mbps |
| 2.4 GHz Maximum Connections | 128 |
| 5 GHz Maximum Connections | 128 |
| Ethernet Port | 2 10/100/1000 Base TX ports |
| Reset Button | 1 reset button |
| LED Indicators | 1 x SYS LED indicator and 1 x LAN LED indicator |
| Power Consumption of the Whole Device | Full load 7.8 W |
| Power Supply Mode | IEEE 802.3af |
| 2.4 GHz Antenna Gain | 4 dBi |
| 5 GHz Antenna Gain | 4 dBi |
| 2.4 GHz Output Power | 20+/-1.5 dBm |
| 5 GHz Output Power | 16+/-1.5 dBm |
| 11b 1 Mbps Received Sensitivity | -95 dBm |
| 11n MCS7 Received Sensitivity | -73 dBm |
| 11a 6 Mbps Received Sensitivity | -93 dBm |
| 11ac MCS7 Received Sensitivity | -75 dBm |
| Software
Specifications |
|
| Operating Mode | AP, Client + AP |
| SSID Hide | Supported |
| 2.4 GHz SSID Number | 8 |
| 5 GHz SSID Number | 4 |
| Chinese SSID | Supported |
| WEP | 64/128 bit encryption supported |
| WPA-PSK | AES/TKIP |
| WPA2-PSK | AES/TKIP |
| WPA | Supported |
| WPA2 | Supported |
| Wireless Access Control | MAC address-based filtering supported |
| TX Power Adjustment | Supported |
| SSID Isolation | Supported |
| AP Isolation | Supported |
| Wireless User Access Limit | Supported |
| Weak Signal Client Access Limit | Supported |
| WMM | Supported |
| 5 GHz Band Navigation (5 GHz Priority) | Supported |
| Multicast to Unicast | Supported |
| Detection Broadcast Message Reply Inhibition | Supported |
| Access Control | Supported |
| VLAN and SSID Binding | Supported |
| LED Control | Supported |
| Diagnostic Tool | ping |
| Timed Reboot | Supported |
| Cyclic Reboot | Supported |
| Device Management | Web management |
| Uplink Detection | Supported |
| Hardware Watchdog | Supported |
| Remote Log Management | Supported |
| Logs | System log |
| Firmware Upgrade | Local upgrade and upgraded by AC |
| Reboot | Local reboot and rebooted by AC |
| Reset | Local reset and reset by AC |
| Backup | Supported |
| Restore | Supported |
| AC Management | AC1000/AC2000/AC3000 supported |
| Working
Environment |
|
| Default Login IP Address | 192.168.0.254 |
| Default User Name | admin |
| Default User Name | admin |
| Operating Temperature | -10°C to 45°C |
| Operating Humidity | 10% - 90% RH (non-condensing) |
| Storage Temperature | -30°C to 70°C |
| Storage Humidity | 10% - 90% RH (non-condensing) |
| Videos |
|---|
| -- No videos available -- |
| Files |
|---|
| W36AP datasheet |
| W36AP Installation Guide |
| Links* |
|---|
| IP-COM website |
| IP-COM support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q & A forum
Be the first to ask a question and help others interested in this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved IP-COM resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.
