Ajax Hub Hybrid (2G) Wired / Wireless Alarm Panel (White)

The Ajax Hub Hybrid alarm panel controls the operation of the entire alarm system and interacts with the user and the security company. it is compatible with both wired (Fibra) and wireless (Jeweller) Ajax devices and seamlessly incorporates Dahua, Hikvision, Safire, EZVIZ and Uniview IP CCTV camera systems. It allows for up to 100 wired or wireless devices in any proportion using either 4 core or cat 5 cable, in either star or ring topology, with cabling up to 2km when using cat 5 cable. The Hub Hybrid can be connected to three Internet providers at a time via Ethernet cable and 2G, SIM cards. Automatic switching between channels takes seconds.

The Hub Hybrid has a built-in antenna for wireless devices and does not need an expander, making it fully compatible with all Ajax Jeweller wireless devices straight out of the box.

Topology

Jeweller Wireless Technology

In addition to wired devices, the Hub Hybrid also allow for up to 100 wireless devices to be added to the system, which is ideal for remote area where wiring would be difficult, or as an additional security measure against scenarios where the alarm wire has been sabotaged. 

Jeweller radio protocol provides two-way communication between the hub and wireless devices at a distance of up to 2,000 meters, allowing remote system control and alarm transmission in 0.15 seconds.

Jeweller applies time frames to synchronize devices communication, authentication to prevent forgery, and encryption to protect the data. An energy-efficient protocol provides wireless devices with up to 7 years of battery life.

Up to 5 range extenders with a communication range of up to 1,800 meters can be connected to Hub Hybrid by radio or cable via Ethernet.

Seven Layers of Security

The Hub Hybrid features 7 countermeasures against tampering, forgery and jamming:

• Demounting and case opening detection: The hub board features two tampers that detect opening and demounting attempts.
• Protection against device forgery: To authenticate devices, unique tokens and properties are used. The hub checks them for each communication session. If any parameter fails the check, the hub ignores the device commands. The procedure excludes the possibility of system control by a third-party device: key fob, smart button, or keypad.
• Hub communication loss detection: Ajax Cloud server polls the hub at intervals of 10 seconds or more. In case of mobile frequencies jamming and disconnection of the wired internet, the server can inform a monitoring station about the complete isolation of the object in just 1 minute.
• Data protection: All the data stored and transmitted are protected by block encryption with a dynamic key. Radio communication uses frequency hopping, which makes interception and jamming more difficult.
• Jamming detection: The hub analyzes the quality of communication with system devices. If some of the data packages are lost, the hub will change the transmission frequencies and inform the monitoring station of interference detection.
• Event transmission and delivery: The monitoring station is notified about alarms and system events in 0.15 seconds. Due to the addressability of devices, the message includes the time, device model, devicename, event type, and room.
• Protection of the line against break: Hub Hybrid features 8 lines and supports ring connection topology - up to four rings in a hybrid security system. In the event of a line breakage, the ring splits into two working segments, devices continue to operate, and the system notifies a security company and users about the incident.

Automated Security

Hub Hybrid allows creating up to 32 scenarios and minimizing the impact of human factor impact on security. The hub can arm and disarm a facility or part of it by schedule. Instantly activate a smoke machine if someone enters the premises. Blackout the premises and turn on emergency lighting in case of fire. Or shut off water in case of a leak. Control lights, electric locks, roller shutters, and garage doors - by arming/disarming, button press, or a detector alarm.

Features:

• Up to 100 wired/wireless devices in any configuration (max 5 range extenders and 5 10 sirens)
• Seamless integration with the Dahua, Hikvision, Safire, EZVIZ, Uniview IP cameras and DVRs
• Up to 50 users
• Up to 32 automation scenarios
• Advanced anti-sabotage measures
• Remote configuration via the Ajax apps
• Compatible with both 4-core alarm cable and U/UTP cat 5 twisted pair
• Star or ring topologies
• Up to 2km cable length when using cat 5 
• Up to 2km wireless distance
• Ethernet and 2G SIM communication
• Alarm photo verification in 9 seconds
• Up to 3.5 days battery backup
• Dedicated apps for installer and end user