0   0  
Pyronix XDH10TT-AM External Tri-Tech Wired Detector
fullscreen
  • Pyronix XDH10TT-AM External Tri-Tech Wired Detector

Pyronix XDH10TT-AM External Tri-Tech Wired Detector

Pyronix Hikvision Pyronix Hikvision

  • Tri Technology
  • 10m range
  • External use
Full description
60 Months warranty
£58.22
£48.52 Ex VAT
Availability: In stock
Delivery from £4.99* Inc VAT
Order Code:12173
Part Code:XDH10TTAM
Reward points8
Warranty60 Months
DELIVERY INFO
Next day delivery available.
Order today for delivery from Wed 29th May
Qty Ex VAT Inc VAT
1+£48.52£58.22

Pyronix Tri-tech External 10 Meter Motion Detector

The XDH10TTAM is a high security outdoor detector, combining established and patented technologies such as Tri-Digital Detection Signal Processing and Tri-Anti-Mask Technology which have been adapted to enhance performance in extreme outdoor conditions.


10m Volumetric coverage
10m Volumetric coverage in both lenses – ideal for hostile environments.


Tri Detection range
The range of XD is determined by the combined range of the three detection technologies it uses – two PIR sensors and one microwave detector. For best performance in outdoor conditions the Tri Detection range is specified between 10m to 13m depending on the lens fitted to the PIR detectors.

2.4m Installation Mode (Lens 5, 10m range): In this mode the detector is installed at height of 2.4m providing volumetric coverage of the area and animal immunity of up to 10kg. This is the factory default configuration where the detector is fitted with Lens 5.
1.5m Installation Mode (Lens 3, 13m range): In this mode the detector is installed at an height of 1.5m providing horizontal curtain coverage of the area and animal immunity of up to 25kg. This is an alternative configuration where the detector is fitted with the supplied Lens 3.


Tri Signal Detection Logic
The detection of human presence is based on the advanced analysis of the activation sequence of the microwave movement sensor and the two independent digital PIR sensors. All three sensors are required to activate at the same time in a particular time window to create an alarm state. Using tri-signal detection logic enhances the detector’s immunity to environmental disturbances.


Anti-Sway Analytics
An advanced filter that is designed to protect against false alarm activations in environments with windy weather conditions and swaying vegetation.


Tri-Anti-Masking Technology
Pyronix patented anti-masking technology provides masking protection for both PIR and the microwave detectors. A protective anti-mask bubble is created in front of the detector and is adjustable from 0 to 1m. If the protective bubble is breached and any of the detector technologies masked with substances like paper, sprays, lacquers, sellotape, cardboard boxes etc. the XD will go into an anti-mask condition activating a dedicated anti-mask relay.


Digital Temperature Compensation
The XD detector will digitally adjust itself to maintain detection range in hot and humid environments where the ambient temperature becomes similar to the external body temperature (equivalent to 32C).


Heavy duty ultraviolet filter
Ultraviolet light is always present in our environment and is particularly strong at high altitude and sea side. The exposure to such high radiation reduces performance and can fully blind PIR lenses. To counter this, XD lenses are coated with a heavy duty ultraviolet filter and manufactured to the highest standards.


Microwave frequencies bands
The XD is supplied with three different frequency bands. Each of them is indicated with a different colour label. This feature allows the installation of multiple detectors in close proximity without the danger of frequency interference.


Built-in walk test buzzer
To enable the installer to perform an easy and quick walk test during installation as well as audible indication of a presence in the detection area, the XD features a built-in buzzer. This creates a buzzing noise to indicate an alarm activation during installation testing (may be disabled if required).


Weatherproof sealed optics
The lens collet is designed to firmly hold the lens in place and create a stable environmental chamber between it and the PIR sensor. A rubber gasket on the lens and a foam gasket on the PIR sensor are used as a further sealant against all weather conditions and humidity. In addition, the sealed PIR sensor chamber protects the PIR sensors from possible insect infestation and internal air movement.


Optional heavy duty bracket
The optional heavy duty tamper proof bracket also includes a cable through feature for easy installation and added security as the wires are hidden away within the bracket. It moves 45 degrees left and right allowing a total area coverage of up to 90 degrees when two detectors are installed next to each other. If wires cannot be hidden in the bracket for any reason, it is also possible to install a conduit to protect the cabling.


Wired Outdoor Detector Comparison

pyronix_wired_outdoor_detector_comparison.PNG?scale.width=733


Key Features:

  • Tri-Signal Detection Logic
  • Anti-Sway Analytics
  • Tri-Anti-Masking Technology
  • Digital Temperature Compensation
  • 3 Microwave frequency bands
  • Built-in walk test buzzer
  • Weatherproof sealed optics
  • Heavy duty ultraviolet filter
  • 10m volumetric coverage
  • Optional heavy duty wall bracket

Product variants available

Detectors technical characteristics

Automatic sensitivity
Yes
Digital temperature compensation
Yes
DEOL resistor on board
Yes
Tamper protection
Front and rear
Intergrated walk test buzzer
Yes
Separate LED indication
Microwave, infrared and alarm
3 microwave frequencies to avoid interference
Yes
Digital independent floating threshold (IFT) technology
Yes
Anti-sway analytics
Yes
Adjustable sensitivity
Auto or high

Detectors technical characteristics

Maximum range
10m (13m with curtain lens)
Volumetric coverage
Yes
Curtain coverage
Optional
Animal immunity
10kg
Tri technology
2 infrared and 1 microwave
Detection speed
0.25 - 2.5m/s
Coverage angle
90 degree (142 degree with curtain lens)
Detection zones
78 (24 with curtain lens)
Detection planes
5 (1 with curtain lens)
Adjustable antimasking (antispray)
Yes
Protection
Ultraviolet light filter


Lens
2 x Lens 5 volumetric lens (UV Compensated)
Optics
Sealed optics
Detection method
2 low noise dual element passive infrared sensors and a microwave doppler unit

Mounting

Wall mounted
Yes - additional wall and fixed brackets available separately
Optimum coverage height
2.4m
Certified mounting height
2.4m

Environmental and operating features

Storage temperature
-40C to +80C
Nominal operating temperature
-30C to +70C
Physical dimensions (H x W x D)
188 x 84 x 77mm
Weight
300g

Electrical & battery

Operating voltage
9-16VDC, 13.8VDC typically
Quiescent current consumption
24mA @ 13.8VDC
Relay outputs
3 x SELV limits, 60VDC 50mA (42.4VAC peak)
Tamper switch
12VDC 50mA both front and rear

Certifications and warranty

Electrical conformity
CE
Certification type
Self certified
Environmental class
IV
Warranty
5 years
Security Grade
Grade 3


There are no reviews for this product. Please leave your review below.

Write your review

Files
No files are available for this product
External links*
Pyronix Hikvision website
Pyronix Hikvision support site

* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.

Be the first to ask a question and help others interested in this product


Ask your question here.

We submit your question to customers who have already purchased this item, direct to the product manufacturer and to our tech support team with the aim of getting you the best possible answer as quickly as possible.


You might also need Brackets

Pyronix back to back bracket for the XD detectors
  • Back to back mounting
  • Create 24m Detection zone
  • For XD detectors
£18.13 £15.11 Ex VAT

Pyronix wall bracket for the XD series detectors
  • For XD range detectors
  • Robust polycarbonate
  • Flexible adjustment
£8.45 £7.04 Ex VAT

Pyronix 45 degree bracket for the XD detector
  • Polycarbonate
  • Works with XD-WALLBRACKET
£4.90 £4.08 Ex VAT

You might also need Lens

Call for price

View all addons for the Pyronix XDH10TT-AM External Tri-Tech Wired Detector

Why buy the Pyronix XDH10TT-AM External Tri-Tech Wired Detector from Connectec?

Support

SUPPORT

Our technical support team are experienced installation engineers with years of field experience.

service_icon.png

SERVICE

Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.

free_delivery_icon.png

DELIVERY

We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150.

partner_icon.png

PARTNERS

We are approved Pyronix Hikvision resellers for direct access to manufacturer warranty and support.