Ajax FireProtect 2 RB (Heat/Smoke) Wireless Smoke and Heat Alarm (Black)
The Ajax FireProtect 2 RB is a wireless smoke and heat sensor that is designed for instant fire detection which features a clever dual-spectrum sensor (Read more)
PRODUCT DETAILS
The Ajax FireProtect 2 RB is a wireless smoke and heat sensor that is designed for instant fire detection. The unique smoke chamber does not require regular cleaning and is impenetrable to insects, and the dual-spectrum sensor distinguishes smoke from steam, making it ideal for use in kitchens or open plan properties.
Two built-in thermistors are responsible for the reaction to temperature rise. Thermistors are located outside the detector for faster threat detection. If the room temperature exceeds 64°C or increases at more than 10°C per minute, the detector recognizes this as a rapid temperature rise and raises the alarm. The temperature alarm can trigger even if there is no smoke in the room.
These RB models feature replaceable batteries which can provide up to 7 years life.
As part of the wireless Jeweller range, the FireProtect 2 RB can be used as a stand-alone product, or added to an existing Ajax alarm hub in order to receive real time notification on the Jeweller app.
Features:
- HazeFlow 2 software algorithm to prevent false alarms on the smoke
- Bispectral optical sensor for filtering false alarms on the smoke
- Maintenance-free smoke chamber
- An interconnected alarm of all fire detectors at the facility in 20 seconds
- Built-in siren with a volume of 85 dB at a distance of 30 meters
- Ability to operate autonomously without an Ajax hub
- Up to 10 years on non-replaceable batteries, and up to 7 years on replaceable
- SmartBracket mounting panel with the ability to align the detector after installation
- Remote control and configuring via Ajax apps
- Pairing with the Ajax hub via QR code
Compatibility |
|
Hubs |
Hub Plus Hub 2 (2G) Hub 2 (4G) Hub 2 Plus Hub Hybrid (2G) Hub Hybrid (4G) |
Radio signal range extenders |
ReX ReX 2 |
Communication |
|
Jeweller communication technology |
Proprietary wireless technology for
transmission of alarms and events. Features:
|
Frequency bands |
866.0 - 866.5 MHz 868.0 - 868.6 MHz 868.7 - 869.2 MHz 905.0 - 926.5 MHz 915.85 - 926.5 MHz 921.0 - 922.0 MHz |
Maximum effective radiated power
(ERP) |
up to 20 mW Automatic power control to reduce power consumption and radio interference. |
Radio signal modulation |
GFSK |
Radio communication range |
up to 1,700 m Between the detector and a hub (or radio signal range extender) in an open space. |
Encryption of radio communication |
All the data stored and transmitted are
protected by block encryption with a floating key. |
Radio frequency hopping |
To prevent radio interference and jamming. |
Sensitive
elements |
|
Sensitive elements |
smoke sensor temperature sensor |
Smoke detection |
|
Sensitive element |
double-spectrum optical sensor Recognizes smoke by the size of particles in the air. |
Protection from false alarms |
Does not react to water vapour |
Patented smoke chamber |
Protects the smoke sensor from dust, dirt, and
insects. |
Dangerous temperature
detection |
|
Sensitive element |
according to the requirements for Class A1 temperature
detectors Requirements of EN 54-5 and BS 5446-2 standards. |
High temperature alarm |
at temperatures above 64°C |
Temperature spike alarm |
when the temperature rises more than 10°C in 1 minute or
less |
Additional
features |
|
In-built siren |
volume 85 dB at a distance of 3 meters Sound notification of alarms. Active until the reason for triggering is eliminated or until the user disables notification. |
Interconnected Fire Detectors Alarms |
All fire detectors in the system turn on built-in sirens if at least one of the detectors registers an alarm. An interconnected fire alarm is activated during one “hub - detector” polling interval but no more than 20 seconds later. |
LED indication |
green is a power indication A LED indicator on the device enclosure lights up once every 56 seconds. The indication meets the requirements of EN 50291. yellow is an indication of malfunctions A LED indicator on the device enclosure lights up when malfunctions are detected. For example, in the case of discharged batteries, contamination of the smoke chamber, or end of the service life. red is an indication of fire alarms A LED indicator on the device enclosure lights up when the detector registers a fire alarm. |
Button on the front panel of the detector |
In normal mode, when pressed, it starts the smoke chamber test.
In the event of an alarm or malfunction, the pressing turns off the
detector sound notification. |
Recommendations |
The device is designed only for indoor installation. SmartBracket mounting panel allows adjusting the position of the detector after installation. |
Anti-sabotage
protection |
|
Tampering alarm |
Alerts of attempts to detach the detector from the surface or
remove the mounting panel. |
Protection against spoofing |
device authentication |
Detection of communication failure |
within 15 minutes The time to detect communication loss depends on the settings for the number of undelivered data packages (specified in the Jeweller or Jeweller/Fibra settings). The polling interval is fixed at 300 seconds |
Power supply |
|
For FireProtect 2 RB (Heat/Smoke) |
2 x CR123A battery |
Enclosure |
|
Dimensions |
124 x 124 x 45 mm |
Weight |
272 g |
Operating temperature range |
from 0°С to +50°С |
Operating humidity |
up to 80% |
Protection class |
IP20 |
Colour | Black or white |
Complete set |
FireProtect 2 RB (Heat/Smoke) Jeweller SmartBracket mounting panel Installation kit 2 x CR123A battery (pre-installed) Quick Start Guide |
AJA0148 | FireProtect 2 RB (Heat/Smoke) (White) | In stock | |
AJA0150 | FireProtect 2 RB (Heat/Smoke) (Black) | In stock |
Videos |
---|
Files |
---|
FireProtect 2 RB datasheet |
Links* |
---|
Ajax website |
Ajax support site |
* External websites provide additional content that supports the content on connectec.uk however the external Web site is subject to change and is beyond the control of Connectec Ltd. Connectec cannot guarantee the accuracy of content on external websites and does not endorse the information or products on any external websites. You will be subject to the external websites own privacy policy when you follow these links.
Get expert answers to questions specific to this product below or for more help visit our Q&A forum
Be the first to ask a question and help others interested in this product
Read customer reviews or submit your review of this product
Your feedback helps us improve our products and services as well as helping other users make informed buying decisions.
There are no reviews for this product.
Why buy from Connectec?
SUPPORT
Our technical support team are experienced installation engineers with years of field experience.
SERVICE
Customer service is our top priority. We always try to ensure we offer a first class service too all our customers.
DELIVERY
We offer FREE mainland UK delivery on orders over £75 and FREE next day delivery on orders over £150*.
PARTNERS
We are approved resellers for direct access to manufacturer warranty and support.
* Qualifying products only, subject to terms. For more information view our delivery information.